|
|
|
Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
||||||
|
General E46 Forum
This is the place to get answers, opinions and everything you need related to your E46 (sedan, coupe, convertible and wagon) BMW! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-06-2009, 07:08 PM
|
#1 |
|
Registered User
|
Calling all electromagicians - Walk this way ...
My brand new water (heater) valve is not opening and I'm freezing. It must not be getting its required 12V. My fuses are OK and each (#23,26 and 62) show 12+ volts measured between fuse slot and ground.
I'm getting 12V between ground and one of the two pin receptors on the connector which supplies current to the valve and 0.0 V when measuring between the other pin receptor and ground. No schematic here. Tried online schematic with no success. Please give clue. Thanks, Paul |
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
