E46 Fanatics Forum banner

Dynavin Info: Look here first...Part 2..."Version 5"

762K views 2K replies 312 participants last post by  Geo31 
#1 · (Edited)
NEW DYNAVIN...

Dynavin has made a substantial change in their offerings and has released their new "D90-3G platform"....following the past nomenclature I think it will likely end up being referred to as a V5. It is a new set of hardware and a new interface. In light of this it is time to update the Dynavin info thread! Discussion can continue about the V1-V4 units on the old thread:

http://forum.e46fanatics.com/showthread.php?t=754606

Much of this post will be the same as the other one but I will change the parts that are relevant to the new unit. Scroll down past the install to get to the new info.


Please read EVERYTHING before you ask a question, pretty much everything has been answered at some point and I will do my best to put all the new info this thread.[/B]

Read the Dynavin FAQ: http://forum.e46fanatics.com/showthread.php?t=803437


As always the Dynavin forum can be found here:
http://dynavin.freeforums.org
Check it out for tips, tricks, hacks, and info.


Due to this post, my involvement in the Dynavin community, and some scary situations with previous Dynavin dealers I have decided to become a Dynavin dealer. You can now get a Dynavin from me along with all the help and advice you might need.....DYNAVIN SOLUTIONS.... you can email me at jtdist@sbcglobal.net, look for me in the sponsor forum here:

http://forum.e46fanatics.com/showthread.php?p=12273055#post12273055

or click the link in my sig to find out how you can get one for yourself.



INSTALL
I am an installer, not full time, i run a small family business that in part sells auto parts and accessories including mobile electronics. I do the installs, Ive been doing a couple a week for 15 years so Ive done.....a lot..... I am an authorized Pioneer Electronics dealer so most of my experience relevant to the Dynavin is with the AVIC line of Pioneer units. I also have owned two cars with factory nav, a 2006 acura and a 2007 lexus, so understand where I am coming from, Ive used quite a few systems like this.


Here is a look at where things start




And the car:


Regular business HU, no HK, but it doesnt matter, everything here applies to the HK system as well, I had the parrot bluetooth running off the steering wheel buttons and an ipod adapter. Its all coming out.


I also have a 4 channel amp, front two channels running the front speakers and the rear two channels running a sub, the signal was being delivered via the factory amp input wires, cut and spliced onto RCA connectors and fed into an EQ and then into the amp.

The rear speakers are stock and still running off the factory amp although I am not using them and have the fader on the HU faded all the way to the front.



look here to do a system like this, awesome write up on amp install using the factory head unit:

http://forum.e46fanatics.com/showthread.php?t=245914



So I took everything apart and took a look at what I was in for:




Take note here that the wiring for the HVAC controls just drops down to the new location for the controls, it only has to move a few inches and there is plenty of slack. I have not yet ordered the HVAC control relocation part but the control fits the old part ok, I used a little bit of 3/8" black weatherstrip foam to support it and hold it in place, it wedges in there pretty tight and looks fine, we will see how it works out. Ignore the mess of wires on the right, thats my parrot blutooth kit, its gone now.

This is important, right in the middle of this picture you can see a white plastic arm that moves a black plastic lever in the airbox, some part of the HVAC system, this part ends up directly below the back of the dynavin unit, be careful that you dont get any wires hung up on this or you are asking for big trouble. I will double check it later from the glovebox side


Next I put the GPS receiver right behind the unit on the metal dash frame, right below the vent ducts, it is magnetic and will stick right there, reception here is good.


So then I plugged everything into the factory wiring:



Take note here since everyone seems to mess this part up

The steering wheel control harness connects to the end of this cable............



NOT here...........




Plugged in the dynavin and put it in the dash, other people have been complaining that there isnt much room in there....they are correct. There is a good amount of space on the left side of the unit, thats where my harness and extra wire ended up. All of the AV connections ended up on top of the dynanvin, there is NO space behind or below the unit:


You can see an RCA cable and a "headphone plug" plugged into the aux in jacks for later use if I want to plug in anything to the aux in or you can run a a/v cable and use the video input as well.....more on that later....

I put all the unused plugs in a plastic bag both to protect them and to keep them from accidentally touching the chassis of the dynavin and causing any weird problems.




Shoved the dynavin in...took a couple tries to get all the wires out of the way and everything where I wanted it. Put the vents back in, and put 2 screws back in to hold everything where it belongs, here you might want to make sure everything is exactly where you want it before you tighten up the screws, the dyanvin fits very well but there is a little wiggle room and I wanted to make sure my gaps were even all the way around.

Now back to that plastic arm and lever....I had my glove compartment out to remove my old bluetooth kit so I stuck my head in there to verify that nothing was binding up the lever and arm. There was a wire back there in this pic, a little too close, I moved it.



I ran the mic, ipod cable, and aux in to where they belonged, you can put them wherever you want, in my case i put the plugs in my euro tray and the mic above the rearview mirror in the factory location. Ran the RCA cable to the trunk, I ran the rca so I could do a little experimenting using the "speaker outputs" vs.the rca outputs.





back in one piece:







INITIAL IMPRESSIONS
The V5 has the same fit, cosmetics, buttons, knobs etc... as the V4 and thats a very good thing, it looks OEM and overall has a quality look and feel to it.

Plugged it in and fired it up, just like the older units the V5 turns on very fast, only a couple seconds and its up and running, MUCH MUCH MUCH faster to start up than the pioneer units that I install regularly and also much faster than my oem NAVs in my acura and lexus.

Unlike with my previous dynavin install, this one was noise free as the Dynavins now come with Line Output Converters to eliminate the past unwanted noise issues, and there is now no unwanted noise in the system. The line level RCAs work great, as far as I can tell with just my ears the dynavin will go to max volume on the RCA outputs clean. This gave my system significantly more available volume than I had with the BMW headunit. Subjectively I would say it is 30%+ louder without any audible distortion. If you are running the factory amp and speakers you should expect similar or slightly better than stock sound quality.

The new interface is completely different, it has mostly orange, white and black displays that match the oem display color and style well.








Overall the audio portion works pretty good, the settings are logical and well laid out although basic, bass, trebel, fader, balance. These controls can be accessed via the settings menu but are also accessible by pressing the volume button....old school....NICE!










RADIO

The Radio works as expected, reception seems fine and the interface is a little more intuative than it used to be. Presets are set and used on the touch screen and you can save stations by frequency or by the name. RDS data displays station,song,artist,etc...






DVD/CD/ETC...

Also works as expected, it will play mp3 data discs with the same interface as the USB.

Picture quality is similar to the older units (and that is good!)






BLUETOOTH
Bluetooth paired to my iphone 3GS no problem and the blutooth audio works very good, both audio and phone connect VERY fast, only a couple seconds to connect.

The bluetooth audio streaming feature does not get enough attention on the dynavin, I think it is the units best feature! With the V5 the audio quality is now good enough to use for music as well as talk! The play/pause button worked with the bluetooth audio, so I can be listening to a podcast with my iphone in my pocket, leave the car, come back and press play and pick up right where I left off. Very nice. I also stream sirius to my iphone using the sirius app or "pocket tunes" app. Works as a nice alternative to sat radio.



The phone book still doesnt work well with the iphone, the contacts do not transfer but you can access your recent dialed and received calls. Your results may vary depending on the phone. Ive had mixed results with calls, just like on the older dynavins I had the best results by using the built in mic and disconnecting the external mic.....I would suggest you experiment a bit as your results may vary.


IPOD
The ipod interface is a work in progress, while it looks very good and displays all the right info, it takes a few too many button presses to access the required controls and I find it to be a bit too "fiddly" to use while driving. For instance, in order to go "back" you have to access a menu while it should just be a static button on the screen. I have been in touch with dynavin about this however and they are working on updating the firmware to make the interface more user friendly possibly even incorporating the steering wheel buttons into the interface. These changes will be firmware update-able so no worries for you current buyers. Its still way easier to use than a DICE or similar unit, its just that it could be MUCH better with just a couple small tweaks. (you can turn off the annoying beep)

http://www.youtube.com/watch?v=4wtUWpFI1jc

HOWEVER I did find that using the supplied remote control makes using the ipod interface a pleasure, with hard buttons for every function its a near perfect ipod interface.....now if dynavin can just mimic the remotes features with the on screen display or the buttons/knobs it will be fantastic!

UPDATE: Dynavin has successfully integrated the steering wheel controls into the ipod interface and this functionality will be available in a future firmware update once its been fully tested and any bugs worked out. Here it is being used in my car.....fantastic feature!

http://www.youtube.com/watch?v=nOe0vBVzDxM










The old models had an ipod video function....but because of a apple imposed incompatibility it didnt work unless you had a jailbroken iphone or ipod touch. Because of this Dynavin has removed the video function from the ipod interface.

BUT you can use the A/V inputs to run video off your ipod. I used an ipod>A/V plug hooked up to the aux in. You have to control it from the ipod obviously but it works.


USB

The USB function works fine although in some ways not as well as on the older units. The new interface does not seem to have the folder limitations that the old one did but it now only support 2 layers of folders.....so it will only see your album folders and your songs but NOT your artist folders....probably not a big issue for many of you but I like to navigate my music by artist>album>song, three layers, so it doesnt work that great for me. Also the load time is a bit slow.....it takes about 45 seconds to load my 16GB USB. Not a deal breaker but the old dynavins loaded faster (although I still need to play around with the file structure to see if that speeds things up)






I got this plug from pac audio and decided to do a nice flush mounted usb in the eurotray.





sweeeeet




DVB-TV
Dynavin has now moved the TV tuner out of the unit and it will be available as a separate add on option, they did this to simplify production and better serve multiple markets (and probably to keep the price down as well)....different countries use different broadcast standards and in the past Dynavin had to make multiple models for different countries, now all the Dynavin E46 models will be the same and the customer will be able to add whatever tuner is appropriate for their country. I was not able to try one of these as the tuners have not been released yet but from what I understand they will be "hide away" and be controlled by the touch screen. The V5 has a large multi pin "Din" style plug in place to accept these upcoming tuners. Ill update this post when I know more.


3G INTERNET FUNCTION
I dont yet have this working on my unit....or should I say that I am still trying to figure out what kind of data sim card to use and I dont want to get roped into a ridiculous 24 month contract just to test it out....If anyone knows a US carrier that offers a "pay as you go" plan on JUST A SIM CARD with no ridiculous fees let me know and Ill get this thing working!



NEW SCREEN!

Dynavin is now using a matte finish screen, when used in conjunction with the supplied anti glare screen protector the glare problem that has plagued the Dynavin from the beginning is greatly improved. I specifically looked to find a reflection to take this pic, this is not the angle that I have when Im driving!



note that in the area of the screen where the rear window reflection is you can still see the display behind the glare. The screen itself is also brighter.

The new screen combined with my glare fix (see the other dynavin info thread for more info) have made glare issues a thing of the past for me.


NAV/WINDOWS

The Nav/Windows portion of the V5 is unchanged so the following is just copied over from the other thread.

The nav portion is good, the large font thing on the street names is kind of odd but is better on some of the zoom/angle settings. I also find it odd that I cant seem to make it display the direction of travel as "up" in 2D mode. I need to play around with this part some more to see if I can find settings to work a couple of the kinks like that out. Overall I would say that the Nav is on par or better than most of the other OEM or aftermarket ones I have used.

Map screens (iGo 8)




Looking for lunch....POI screen






the igo software is easy to modify and there is a large online community dedicated to customizing and tweaking it. Since the igo nav system is on the micro sd card in the front of they dyanavin it is easy to take out, stick it in your computer and HACK it. Im not going to go into the details here but I googled it and found some skins and some different color schemes, played around with it, and found some some stuff that I really liked, much better looking, cleaner, more adjustable, even easier to use. Here is what the skin I am using now looks like:







the skin you see here is from:
http://www.igo8mods.com/dimka.htm

And the color scemes I found here, I liked the stuff by "Xerses"
http://artwork-igo8.blogspot.com/search/label/scheme

Update: Im now running a customized 800x480 high res version of igo8.3, It looks amazing, it works amazing. It wasnt easy as I am not a computer programmer but i was able to figure it out (with a little help), spend some time here if you want to make it happen:

http://dynavin.freeforums.org

There is also a lot of discussion of this on the other Dynavin info thread in recent weeks.


If you want to customize your Navigation experience.....start by looking here: http://forum.e46fanatics.com/showthread.php?t=754606&page=42 There are some good links on this page of the thread that will get you going in the right direction:


Check out the size of the fonts (yes I can see them while driving, pic quality here limited due to iphone pic while driving).....800x480.....nice!




And the windows interface, you wont see this stuff unless you go looking for it.




windows media player





Random video of the Dynavin in action

http://www.youtube.com/watch?v=71P3Jz6Qa_8

In this video Im running iGo Primo for the Nav instead of the stock iGo8...very nice!





a pic of a finished install in a fellow fanatics car, I thought it looked great in his dash!



and a shot in my car





VERDICT:

I gave the old unit a 6/10.....with the improvements to the V5 I give it a 7/10 with potential to be an 8/10 if the ipod and USB interface improves, as it sits now it is a fantastic value, and a very very good, if slightly flawed upgrade.

to be continued...
 
See less See more
40
#190 ·
yeah, sorry about the UPS signature requirement thing but Paypal requires that I do signatures on sales over a certain dollar amount if we want the buyer and seller protections to be in effect....Besides, I dont think you want the UPS man leaving your dynavin on your doorstep all day.
 
#202 ·
depends on who you buy from....I try to make sure the right maps are loaded for my customers....
 
#210 ·
lol, what I find funny, everything is developed to make us that much more lazy. Seriously, think about it. all these wonderful automatic things have been created to make life "easier". In actuality, it does nothing but make us lazy and expecting more of the same.

imo, I don't even use my steering wheel controls. while cool, I don't even remember I have them unless I accidentally hit them. the SSV, I could care less about. it is annoying to me actually. If I knew I could shut it off, I would have a long time ago when I bought the car. since I knew I was upgrading, I didn't care to look into it.

oh well. you can't make everyone happy and nothing is perfect. That is life.

And dang it, I won't have my unit until tomorrow. Unless the UPS driver calls me and meets me somewhere today. UPS won't hold it or anything until they have made one attempt to deliver. either way I wasn't going to install until this weekend anyway.
 
#218 ·
got my dynavin today. UPS driver hooked me up to get it to me.

looked at everything, it all appears there. looks like monday I will be installing. maybe start it on sunday. looking forward to finally be able to play the iphone again and legally make and receive calls.
 
#222 ·
Hi,

Ive read a number of posts online about the Dynavin Unit. Today I received mine, and attempted to install it.

However, ive come to a problem. On the side of my original unit (the Harman Kardon 7inch) it has two plugs that look like the below images;








Is there an alternate cable / adapter that I can buy or do I need the 5M Fakra harness? This is the harness that I received with my unit which obviously doesn't fit;



Please Help!
Thankyou all!
 
#228 ·
Well as far as i know i dont have the factory NAV - if i do, there is no option to use it...

All i have is the factory double DIN head deck that came with the vehicle.

Jezz i hope that makes sense. Im assuming the Fakra runs from somewhere in the boot/trunk to the head deck, if so, where in the boot can i look for the amp?

Sorry for the newbie questions, just wanna be 100% sure.

Ty!!
 
#227 ·
yes. the dynavin would be easier than any double din. the problem is the AC controls and ducting. for a double din unit you have to cut into the factory ducting and do some minor fabrication to fit the unit.

i think dynavin has a side view pic on their site and there is probably one on here somewhere as well. it is basically a single din like factory, but has the double din face. so it is almost just a drop in unit aside from your typical wiring for an aftermarket setup
 
#229 ·
Oh, I have never seen that head unit, from the side, it looks like factory NAV. Anyway, probably the same issue though, since you don't have connectors to hook the Dynavin to stock wiring. The Amp is in the trunk on the drivers side. You have to remove that carpeting/panel. Once you do, see if the amp has a big square block connector that would accept "flat" pins. If so, then the Fakra 5M would probably be what you need.
 
#233 · (Edited)
so i didnt find all the info i needed.. im gonna run quite a nice setup.. including JL Amp and JL Subs.. is there subwoofer control with this unit? i know there is a subwoofer output, but is their individual control over the sub level?

Honro - i dont appreciate you flicking us off (giving us the bird) in that picture haha.. kiding
 
#236 ·
so i didnt find all the info i needed.. im gonna run quite a nice setup.. including JL Amp and JL Subs.. is there subwoofer control with this unit? i know there is a subwoofer output, but is their individual control over the sub level?
No the sub RCA out is a non fading non adjustable output. I have mine hooked to a sub control knob.
 
#234 ·
Hi Honro,

That looks just like the 16:9 7" BMW Navigation display. I just removed mine about a month ago. If it does not function either the CPU-DVD is dead or you have nonavigation DVD in the CPU (should be in trunk/boot). In any case, you will most likely need the 5m_Fakra cable. You can order it from here: http://www.cardvdkit.com/index.php?main_page=product_info&products_id=156.

You will also need a 15m antenna extension cable like this: http://www.amazon.com/Metra-44-EC204-204-Inch-Antenna-Extension/dp/B0007WQ8MU/ref=pd_cp_e_3.

You have any questions, let me know.

Ray
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top