new rims/tires soon- questions about best setup for better handling. - Page 2

roastbeef · 11-04-2009, 05:34 AM

well thanks for the help. how about the offset combos and pcd? (i'm not even sure what pcd is) do these options impact performance? or is it more cosmetic then anything?
http://www.velocitymotoring.com/links/wheels_v710.htm

ChrisTKHarris · 11-04-2009, 05:36 AM

PCD - bolt pattern 5x120mm

18s or 19s doesn't matter
8.5" 35-40mm offset
9.5" 40-45mm offset

18s 235/40/18 and 255/35/18
19s 235/35/19 and 255/30/19 (or if you want to go a bit wider in tire then get a 265/30/19)

roastbeef · 11-04-2009, 05:45 AM

Quote:

Originally Posted by ChrisTKHarris

19s 235/35/19 and 255/30/19 (or if you want to go a bit wider in tire then get a 265/30/19)

is the difference in width in the numbers above make a difference in how much tread is on the pavement?

also, any negatives to going with a 9.5 over an 8.5 rim?

novaboi323i · 11-04-2009, 08:03 AM

^it'll be a heavier wheel...19's are strictly for looks, they'll noticeably make the car slower.

But hey, at least you'll look good going slow

roastbeef · 11-04-2009, 08:04 AM

fml.

BMWespresso · 11-04-2009, 08:34 AM

Yeap 18" or less, 17" best, I'm running 17x9 42et @ 17.4lbs, good luck

ChrisTKHarris · 11-04-2009, 11:24 AM

Quote:

Originally Posted by roastbeef

is the difference in width in the numbers above make a difference in how much tread is on the pavement?

also, any negatives to going with a 9.5 over an 8.5 rim?

When it comes to tire sizes a 265 is 10mm wider than 255. Not super noticeable, but some poeple enjoy more rubber as it increases the size of the contact patch on the road, but also can increase your probability of rubbing if say you decide to lower the car.

A wider rear wheel LOOKS much better, but it also creates more understeer. So it's your choice.

roastbeef · 11-04-2009, 11:44 AM

thanks a bunch for your help chris, and everyone else.

ChrisTKHarris · 11-04-2009, 12:13 PM

no problemo

m1356guy · 11-04-2009, 01:59 PM

Quote:

Originally Posted by BMWespresso

Yeap 18" or less, 17" best, I'm running 17x9 42et @ 17.4lbs, good luck

This guy knows whats up

VMRWheels · 11-04-2009, 03:39 PM

Looks like Chris took over the thread...

Roastbeef, since you are located in Huntington Beach come by our warehouse in Santa Ana and we can throw on some wheels for you.

-Charles@VMRWheels

ChrisTKHarris · 11-04-2009, 03:49 PM

Quote:

Originally Posted by VMRWheels

Looks like Chris took over the thread...

Roastbeef, since you are located in Huntington Beach come by our warehouse in Santa Ana and we can throw on some wheels for you.

-Charles@VMRWheels

I do what I can.

roastbeef · 11-04-2009, 10:28 PM

anyone have any illustrations that show the difference between say 235/35/19 and 255/30/19? i don't want my rim to be sticking out farther then the tire all retarded.

blp88 · 11-04-2009, 10:59 PM

I also drive a 325. While I completely understand looks over performance(as a 325 is only a 325 anyway!) I can def feel the difference between the stock 17's and my 19s. The car has more pep with the 17's. Have you seen d-force empowers? They are 18" which will suit the car, especially if you lower it. While the 710s look good and all, they are NOT lightweight!

http://forum.e46fanatics.com/showthr...=325xi+empower

Chris-alfonso · 11-05-2009, 12:20 AM

Quote:

Originally Posted by m1356guy

dunlop direzza sport z1 star spec > nitto nt05

+ kosei k1s =

+1

VMRWheels · 11-05-2009, 02:02 PM

Quote:

Originally Posted by roastbeef

anyone have any illustrations that show the difference between say 235/35/19 and 255/30/19? i don't want my rim to be sticking out farther then the tire all retarded.

235/35/19 will be perfectly square on a 8.5" wheel. The 255 will give a slight stretch on a 9.5" wheel depending on what tire manufacturer and model you decide to go with.

-Charles@VMRWheels

roastbeef · 11-05-2009, 02:58 PM

Quote:

Originally Posted by blp88

I also drive a 325. While I completely understand looks over performance(as a 325 is only a 325 anyway!) I can def feel the difference between the stock 17's and my 19s. The car has more pep with the 17's. Have you seen d-force empowers? They are 18" which will suit the car, especially if you lower it. While the 710s look good and all, they are NOT lightweight!

http://forum.e46fanatics.com/showthr...=325xi+empower

thanks for the info. i also wanted to compliment you on your great looking, tastefully modded car. good job.

Quote:

Originally Posted by VMRWheels

235/35/19 will be perfectly square on a 8.5" wheel. The 255 will give a slight stretch on a 9.5" wheel depending on what tire manufacturer and model you decide to go with.

-Charles@VMRWheels

thanks for the info. do you guys have 18/19" rims with rubber mounted on them? i would like to come by and see if i can fit a rim to the car to gauge how i like the look of the size. i'm still flip-flopping between 18's and 19's.

VMRWheels · 11-05-2009, 03:37 PM

Quote:

Originally Posted by roastbeef

thanks for the info. do you guys have 18/19" rims with rubber mounted on them? i would like to come by and see if i can fit a rim to the car to gauge how i like the look of the size. i'm still flip-flopping between 18's and 19's.

Maybe these pics might help?

-Charles@VMRWheels

18" VB3

19" V713

Penguin Koolaid · 11-05-2009, 05:39 PM

If you want style and performance, O.Z. has a nice lineup of wheels.

roastbeef · 11-05-2009, 07:34 PM

charles, the car in the lower pic looks lowered, but do you know if the car in the upper pic has suspension mods?

11-04-2009, 05:34 AM	#21
roastbeef Registered User Join Date: May 2008 Location: huntington beach, ca Posts: 289 My Ride: '04 325Ci View My Garage	well thanks for the help. how about the offset combos and pcd? (i'm not even sure what pcd is) do these options impact performance? or is it more cosmetic then anything? http://www.velocitymotoring.com/links/wheels_v710.htm __________________ heavily modified nissan frontier, and a 325ci for a daily driver. fun off the road, fun on the road.

11-04-2009, 08:03 AM	#24
novaboi323i Registered User Join Date: Feb 2006 Location: Alexandria, Virginia Posts: 1,433 My Ride: 323i View My Garage	^it'll be a heavier wheel...19's are strictly for looks, they'll noticeably make the car slower. But hey, at least you'll look good going slow __________________

11-04-2009, 08:04 AM	#25
roastbeef Registered User Join Date: May 2008 Location: huntington beach, ca Posts: 289 My Ride: '04 325Ci View My Garage	fml. __________________ heavily modified nissan frontier, and a 325ci for a daily driver. fun off the road, fun on the road.

11-04-2009, 08:34 AM	#26
BMWespresso Registered User Join Date: Aug 2008 Location: Miami Posts: 753 My Ride: 2005 325CI View My Garage	Yeap 18" or less, 17" best, I'm running 17x9 42et @ 17.4lbs, good luck __________________

11-04-2009, 11:44 AM	#28
roastbeef Registered User Join Date: May 2008 Location: huntington beach, ca Posts: 289 My Ride: '04 325Ci View My Garage	thanks a bunch for your help chris, and everyone else. __________________ heavily modified nissan frontier, and a 325ci for a daily driver. fun off the road, fun on the road.

11-04-2009, 03:39 PM	#31
VMRWheels Sponsor Join Date: Sep 2004 Location: Irvine, CA 1-877-279-6462 Posts: 3,948 My Ride: 1:25 Scale Enzo View My Garage	Looks like Chris took over the thread... Roastbeef, since you are located in Huntington Beach come by our warehouse in Santa Ana and we can throw on some wheels for you. -Charles@VMRWheels __________________ Charles @ VMR Wheels Email - charles@velocitymotoring.com Tel - 714.442.7916 ext 107 [24 Hour Live Inventory] [NEW VMR V701 Straight Spoke][NEW VMR V718 Signature Mesh] [V713 19"] [VB3 19x10"] [VMR Wheels Gallery]

11-04-2009, 10:28 PM	#33
roastbeef Registered User Join Date: May 2008 Location: huntington beach, ca Posts: 289 My Ride: '04 325Ci View My Garage	anyone have any illustrations that show the difference between say 235/35/19 and 255/30/19? i don't want my rim to be sticking out farther then the tire all retarded. __________________ heavily modified nissan frontier, and a 325ci for a daily driver. fun off the road, fun on the road.

11-04-2009, 10:59 PM	#34
blp88 Registered User Join Date: Nov 2004 Location: ATL Posts: 884 My Ride: 325i View My Garage	I also drive a 325. While I completely understand looks over performance(as a 325 is only a 325 anyway!) I can def feel the difference between the stock 17's and my 19s. The car has more pep with the 17's. Have you seen d-force empowers? They are 18" which will suit the car, especially if you lower it. While the 710s look good and all, they are NOT lightweight! http://forum.e46fanatics.com/showthr...=325xi+empower __________________ O MY 3-JB zsp Mtech~19's & 17's~two-tone interior~tint~lip spoiler~sat radio~perf. zhp steering wheel~euro plate~h&r~debadged~clears~more less important things :)

11-05-2009, 05:39 PM	#39
Penguin Koolaid Registered User Join Date: Feb 2004 Location: Gotham Posts: 5,180 My Ride: Slushbox View My Garage	If you want style and performance, O.Z. has a nice lineup of wheels. __________________

11-05-2009, 07:34 PM	#40
roastbeef Registered User Join Date: May 2008 Location: huntington beach, ca Posts: 289 My Ride: '04 325Ci View My Garage	charles, the car in the lower pic looks lowered, but do you know if the car in the upper pic has suspension mods? __________________ heavily modified nissan frontier, and a 325ci for a daily driver. fun off the road, fun on the road.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: