E46 Fanatics Forum banner

So I bent rear left lifting floor now what?

9K views 18 replies 8 participants last post by  AquaRelliux 
#1 ·
Just as topic says I managed to bend my floor under my lifting blocks by accidentally lifting the car with the jack a bit of the block close to the side skirt. This caused the block to collapse in on the outer side of the block:( can this be fixed? I can still lift the car fine by lifting it on the side that is not collapsed.
 
#11 ·
It can be removed prolly have to brake it tough, Dont you guys think it can be bent back and function properly? Here is a picture, not the best one but you can see that lifting block is closer to the sideskirt than it should be.

<a href="http://s1149.photobucket.com/user/AquaRelliux/media/IMG_09421_zps2ea780d8.jpg.html" target="_blank"><img src="http://i1149.photobucket.com/albums/o595/AquaRelliux/IMG_09421_zps2ea780d8.jpg" border="0" alt=" photo IMG_09421_zps2ea780d8.jpg"/></a>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top