E46 Fanatics Forum banner

Help with cleaning the MAF sensor please

963 views 3 replies 2 participants last post by  LagunaSecaM3 
#1 · (Edited)
Hey guys i wanted to clean my MAF Sensor and was wondering if someone could help me with where it is and how to do it, maybe theres a DIY out there?
 
#3 ·
The MAF sensor is located on the hard black tube that goes from your air filter to the intake manifold. You can remove the MAF by removing the screws that hold it in the tube, or you can remove the tube by removing the entire tube from both sides it attaches to. There is a pipe clamp on one side and a rubber gasket holding it on the other side. Once you remove the tube or sensor, be careful not to touch the inside part. Take some contact cleaner without lubricant and spray the sensor well. Good luck.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top