E46 Fanatics Forum banner

SoCal Installer & Rim Rebuilding & Fender Rolling Rental (:

96K views 974 replies 94 participants last post by  omhl 
#1 · (Edited)
Hey guys, so it's official. I'm a E46F Sponsor, and now offering my services. Feel free to pm me if you need any work done. I will be updating this thread with more pictures of my work & prices.

My old thread got deleted but it's okay, time to start a new one. :)

Suspension Work
---

- Coilovers w/ Full Adjustments - 100$ bucks.
- Sway Bars - 30$ each side.
- LCA Bushing - 80$ includes bushing being removed & press if required.
- RTAB Bushing - 80$
- LCA Arm Replacement - 150$
- Brake Change - 20$

Engine Work
---

- Valve Gasket Seals - 80$
- Oil Change & Filter Change - 20$ bucks, bring your own oil.
- Air Filter Change - 5$ bucks, bring your own air filter.
- Spark Plug Change - 20$ bucks, bring your own spark plugs.
- Oil Sender - 30$ bucks, bring new oil.
- Differential Fluid Change - 20$ bucks.
- Transmission Fluid Change - 20$ bucks.
- Differential Swap - 250$ + 50$ if you need your differential bushing changed.

Headlight Retrofit - 150$ and you bring your own projectors. I recommend the FX-R's they work great.

I can pretty much do anything, involving wiring, retrofitting, I have experience in a lot of things lol. I even do air suspension! I can also rebuild rims :)

If you would like to rent the fender roller it is 50$ bucks + a 200$ deposit just incase you ruin or break or steal my tool.

If you can vouch for me, or have gotten work done by me please vouch :)

Here is some picture of my work..

I just rebuilt a set of step lipped vsxx in 18's.


I have installed alarm systems a couple times, I do it the stealth way involving wire loom, soldering, and tucking all the wires.


Here's my fender roller,


Rerouting my air suspension hoses,




Most work will be done in my driveway, if it is a pain in the ass job I'll pull it into my lift at the shop but I don't like to go there because it takes away customers from my pops.
 
See less See more
5
#578 · (Edited)
I'm going to go with Steven ^^ next time he has you do work on his car. Can you pm me price to just put my Enkei Nt03's on. I have a shop that can align the car to my specs, I just want the wheels on the car before I show up. This is what I think you will need to do but feel free to pm me your input.

1. Adjust ride height (I'm on TCK DA coilovers)
2. Adjust camberrr to at LEAST -3 up front (Vorshlag Plates)
3. Maybe Roll front fenders?

Also, Is there something we can do to make my rusty wheel hubs look a little more aesthetically pleasing. This rust is just too much. :facepalm:

Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top