E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > E46 BMW > E46 Convertible

E46 Convertible
The E46 vert forum. Talk about dropping your E46 top here.

Thread Tools Search this Thread Rating: Thread Rating: 98 votes, 5.00 average. Display Modes
Old 06-07-2016, 11:59 AM   #161
Registered User
Join Date: Aug 2012
Location: London and Bristol
Posts: 409
My Ride: 330CI Sport
Everyone with a convertible may as well have a new wiring loom ready. It's a nice diy job and it needs doing anyway after 10-16 years , which is how old all our cars are!
Landlorder is offline   Reply With Quote
Old 06-17-2016, 09:43 PM   #162
Registered User
Join Date: Sep 2014
Location: Cincinnati
Posts: 72
My Ride: 2002 330ci vert

Last edited by cxoakes; 06-18-2016 at 08:43 AM. Reason: Incorrect information
cxoakes is offline   Reply With Quote
Old 02-13-2017, 12:06 PM   #163
Registered User
Join Date: Feb 2017
Location: Switzerland
Posts: 8
My Ride: E46 M3 Convertible
This thread is amazing. i bought an e46 M3 convertible yesterday with a roof that does not move. the previous owner said that BMW told him its one of the potentiometers/sensors that is dead. your posts will help me a lot with my troubleshooting. thanks guys!
gigu is offline   Reply With Quote
Old 02-13-2017, 02:52 PM   #164
Registered User
Join Date: May 2015
Location: greece
Posts: 27
My Ride: bmw
Good job!

***931;***964;***955;***952;***951;***954;***949; ***945;***960; ***964;***959; LG-D855 ***956;***959;***965; ***967;***961;***951;***963;***953;***956;***959;***960;***959;***953;***957;***964;***945;***962; Tapatalk
sixelaaaa is offline   Reply With Quote
Old 02-21-2017, 07:58 AM   #165
Jack fontijn
Registered User
Join Date: Feb 2017
Location: Holland
Posts: 13
My Ride: 330ci

Originally Posted by djsilver View Post
I just finished repairing a broken wiring harness on my wife's car with help from info found here and other places and would like to put the resources I found in one thread. The mods can even sticky this one if they like.

The BMW TIS/ETK system can be found various places on the web. It will have instructions on how to work on the top and part numbers if needed. Here's just one place I used;

Here's the BMW wiring diagram system; (better than the one above)

I've attached a pdf of the CVM pinout diagram, with notes. I've listed the wire colors for the connection to the convertible top harness and noted the device numbers from the top manual where possible.

Here's my advice if the top is not working. Take it to someone that can read the codes, even if you plan on doing the work yourself. Pay the diagnostic fee and be happy. Otherwise you're completely in the dark.

Now for the real work!

1. All the sensors (except for the storage compartment floor/S239) are Hall-effect sensors and will have some resistance on them regardless of position. They have no moving parts and have a low failure rate, so if the software diagnosis is a bad sensor/valve/motor, it's very likely there's a broken wire.

2. Now you or your mechanic will have to remove the back seat and rear left passenger armrest and trim panel to access the CVM. For the next check, unplug the top harness (white connector) from the CVM and check for resistance on matching pairs according to the diagram. Start with the one that was noted bad in the software diagnosis. All the sensors and solenoid valves on this harness should have some resistance on them.

3. If any of them show an open circuit it's time to get serious, as the next step requres you to start taking stuff apart. The next step is to disconnect the questionable device from the harness and test it, and if it's bad, replace it.

4. If the device tested is not open circuit that means a wire is broken in the harness. You'll have to get some extra wire and check continuity on both wires to the pair in question to determine which one is broken. Once you find it, it's up to you if you want to split the harness and look for it. I bought some 18ga black automotive wire and ran a jumper along the length of the harness from the top latch sensor all the way to the CVM connector.

1. My experience was with the top harness but similar techniques can be used on the other harnesses connected to the CVM.
2. Remember that the windows and storage compartment cover are controlled by the general module, so when you push the up or down button, control is handed back and forth between the GM and the CVM twice per cycle.
3. Don't let someone sell you new top latches just because there's cracks in the plastic jack-screws. The plastic is cast onto the end of a metal bar. The metal bar has two holes drilled through it so the plastic is cast through the holes and it won't fall off!

If you have or find more tools for troubleshooting the convertible top feel free to add it here. If you find mistakes in my information please point it out.

having some troubles with my E46 330ci top
I've tried to find the wiring diagram but the link say's page not found
so can you send me a copy if you have?
Thanks in advance jack_nr_
Jack fontijn is offline   Reply With Quote
Old 03-20-2017, 10:05 AM   #166
Registered User
Join Date: Nov 2015
Location: EU
Posts: 20
My Ride: Focus>E39>E46
Hey Jack - if you get it, can you upload it to the thread?
gateguardian is offline   Reply With Quote
Old 03-20-2017, 12:05 PM   #167
Jack fontijn
Registered User
Join Date: Feb 2017
Location: Holland
Posts: 13
My Ride: 330ci
Did not find any but for me was easy fix one off the wires
Above the left side chair was broken
Jack fontijn is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON

All times are GMT -5. The time now is 04:18 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - 2016 performanceIX Inc - privacy policy - terms of use