E46 Fanatics Forum banner

Aftermarket head unit install problems

1K views 2 replies 2 participants last post by  joshbosh 
#1 ·
I bought my 2002 BMW 325ci with an aftermarket Pioneer head unit already installed but no steering wheel control module. I decided to install one myself. Got everything hooked up with the battery disconnected, reconnected the battery, programmed the SWC unit, and everything worked great.

Then I made a mistake. I forgot to disconnect the battery before pushing the wiring harness and head unit back into its slot. As I was doing so, I heard some odd noises and then the sound cut off. Head unit was still getting power, just mo sound. I kicked myself for not disconnecting the battery and proceeded to check all fuses. No blown fuses in the glove box or on the head unit.

After checking fuses, I tried to turn it back on and now there is no power to the head unit.

Fuses 7 and 41 are good, tried switching with others.

Please help. Did I fry something? Hidden fuse somewhere?

Help is much appreciated.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top