Ok, I've searched up and down, and I've read the DIY on it, but I can't seem to find an answer to this specific question... so here goes:
The DIY deals with changing a typical SP wheel with an M3 wheel. Also, there are instructions (separate site) for the Step/M3-SMG wheel conversion.
But what about converting a car that already has SMG (Z4 or the 04 3ers) to an M3 wheel?
Do you need only the "standard" M3 wheel since you already have the SMG paddles?
Or would you still need the whole "SMG" M3 wheel? If that's the case, what's the P/N for the M3 SMG Wheel? I have the PN from the standard M3 wheel from the DIY.
The M3 wheel is going to be my first mod no matter what.
I just have to drive a SMG now to see if I like it enough to order it. But then I can at least be prepared to make the switch when I get the car in.
The DIY deals with changing a typical SP wheel with an M3 wheel. Also, there are instructions (separate site) for the Step/M3-SMG wheel conversion.
But what about converting a car that already has SMG (Z4 or the 04 3ers) to an M3 wheel?
Do you need only the "standard" M3 wheel since you already have the SMG paddles?
Or would you still need the whole "SMG" M3 wheel? If that's the case, what's the P/N for the M3 SMG Wheel? I have the PN from the standard M3 wheel from the DIY.
The M3 wheel is going to be my first mod no matter what.
I just have to drive a SMG now to see if I like it enough to order it. But then I can at least be prepared to make the switch when I get the car in.