Site Sponsor Group Buys
Group buys from the sponsors that support E46Fanatics.com and other approved group buys.
||Thread Tools||Search this Thread||Rate Thread||Display Modes|
|07-01-2014, 02:22 PM||#1|
APEX | 19" ARC-8 Pre-Order
APEX 19" ARC-8 Lightweight Wheel - Pre-Order Group Buy
Pre-Order Extended to October 15th
Sizes and Colors Available:
19x8.5" ET35 - 20.45 lbs - Profile 1 - $334
19x8.5" ET20 - 20.70 lbs - Profile 3 - $334
19x9.0" ET38 - 20.70 lbs - Profile1 - $344
19x9.0" ET20 - 20.35 lbs - Profile 3 - $344
19x9.5" ET33 - 20.50 lbs - Profile 3 - $364
19x9.5" ET22 - 20.95~ lbs - Profile 3 - $364
19x10.0" ET25 - 21.95 lbs - Profile 3 - $374
19x10.5" ET22 - 22.95 lbs - Profile 3 - $394
Official Payment collection day starts: July 31st, 2014
Official Close Date and last day to pay: October 15th, 2014
Product Ship Date: Mid October 2014
*ETA’s will be updated as we are closer to the 19” ARC-8’s arriving*.
Pre-order promotional pricing of $200 off + free shipping is for the purchase of a complete set, and only applies to new 19" ARC-8 wheels. This offer is valid until September 30th. No other wheels qualify for this promotion. Wheels may be purchased individually, as the per unit discount is $50 off. This offer is not available after September 30th.
Free shipping is to the 48 mainland states only with UPS. Alaska, Hawaii, and International, and orders shipping with methods other than UPS Ground can receive a $75 discount per set towards the true cost of shipping. This site will not automatically provide the $75 discount. Please contact us for order processing.
There are NO refunds on discounted pre-orders. Orders may be exchanged within 30 days of shipment for another set. Any shipping costs to and from APEX will be covered at the buyers expense. The original set must be received back prior to shipping out the replacement set. Any APEX wheel may be selected when making an exchange. The invoice price paid will be credited towards the new order total. Only 19" ARC-8 wheels qualify for the $200 set discount and free shipping* discount. Additional payment may be required if exchanging to any non-promotional items.
An RMA number is required to ship back any wheels. No wheels may be returned without prior approval and receipt of an RMA number.
Pre-orders cancelled prior to September 30th will receive a full refund back via the original payment source. Orders cannot be cancelled after September 30th unless the order has not shipped by October 30th. Orders may be held from shipping and exchanged to an alternative set for up to 30 days from the intended ship date.
Wheels are currently expected to arrive in late September or early October.
If wheels arrive early, they will automatically begin shipping out as order are fulfillable. If wheels arrive after the close of the promotional period, then wheels will ship within 2-3 days of arrival at our warehouse.
ARC-8 Product Information:
Long anticipated, and arriving in Q3 2014, the APEX ARC-8 wheel will finally be available in 19" sizes for BMW. The ARC-8 design was first released back in 2009, and originally only available in race oriented fitments in a smaller 17" and 18" diameters. The straight spoke mesh design allowed for a strong and light-weight wheel that quickly became popular among racers and enthusiasts alike for it's deep spoke concavity.
The new 19" diameter is part of APEX's push towards supporting both the race and street crowd with specialized fitments. These larger diameter wheels are configured to cater more specifically to the aesthetic needs of the street going enthusiast, along with functional changes that better meet the needs of the street environment.
Just like the rest of the APEX wheel line, the ARC-8 is once again produced using the Flow-Forming manufacturing process. Flow-Forming, which has also been called "Roll Forging" or "Spin Forging", produces a barrel with similar strength to that of a fully forged wheel. This reduces weight in the most significant part of the wheel, as it has the greatest impact on rotational mass.
More aggressive wheel widths and offsets were selected versus our line of race-oriented wheels, allowing for a flush fit without spacers. Now available in 17", 18" and 19" diameters, the ARC-8 is produced using two unique face profiles for each diameter with increasing spoke concavity. A total of 25 BMW specific sizes will be available once these 8 new 19" sizes arrive. This new diameter will be available in 3 finishes: Hyper Silver, Anthracite, and Satin Black. Hyper Black will not be available upon initial release. Sizes, and pricing are listed in the graphic below. Weights will be updated upon receipt of final production samples.
Strength improvements were made to help specifically address the unique abuses of the street where low-profile and stretched tire fitments are used. To help fight wheel bends, we've increased the thickness of the wheel's inner lip. Load ratings exceed JWL requirements, and all sizes have been crush tested in Japan, earning them official VIA certification and registry marks. Additionally, the barrel's diameter increases sharply after the drop center, improving big brake kit clearance. The ARC-8 also accepts OEM Roundel center caps, TPMS sensors, and comes with our newly redesigned gloss-black APEX center caps.
For those that fell in love with the ARC-8***8242;s looks and lightweight features but wanted something larger, your wheels are now here.
Last edited by David@ApexRaceParts; 10-01-2014 at 12:18 PM. Reason: Auto-save 1405388072
|Ads by Google|
Guests, get your FREE E46Fanatics.com membership to remove this ad.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|