|
|
|
|
||||||
|
General E46 Forum
This is the place to get answers, opinions and everything you need related to your E46 (sedan, coupe, convertible and wagon) BMW! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-18-2002, 05:40 PM
|
#1 |
|
Registered User
|
Help! Rubbing ... :(
I got a set of wheels and tires recently but the rear ones rub badly to the outer fender. The tires got scratch and cut badly.
my tire sizes are 265, 30, 19" for the rear. Questions: 1) Can they shop flatten the outer fender nicely ? 2) Can I adjust the camber to have more negative setting to avoid the problem? but I doubt if I can do so as the tires may then rub the inner fender. Anyone had the problem before? Any idea? Thank you |
|
|
|
04-18-2002, 05:49 PM
|
#2 |
|
Registered User
|
A better pic...
I have got a better pic...
|
|
|
|
|
04-18-2002, 05:55 PM
|
#3 |
|
[name here]
|
You need to get your fenders rolled
|
|
|
|
|
04-18-2002, 05:59 PM
|
#4 |
|
Bavarian Motor Slave
|
you gotta get rolled...
|
|
|
|
|
04-18-2002, 06:40 PM
|
#5 |
|
Registered User
|
Will the paint chip off with fender rolling?
Since I need to do the fender rolling for the outse side, I donno how much damage will it bring to the paint of the face of the wheel fender.
|
|
|
|
|
04-18-2002, 09:27 PM
|
#6 |
|
Registered User
|
Car Nutz in Bellevue, WA
I went to Car Nutz in Bellevue, WA and the guy said they can do the fender rolling for $50 on each side. I hope they will do a good job
 Eric |
|
|
|
|
04-18-2002, 09:34 PM
|
#7 |
|
Registered User
|
Car Nutz in Bellevue, WA
I went to Car Nutz in Bellevue, WA and the guy said they can do the fender rolling for $50 on each side. I hope they will do a good job
Eric |
|
|
|
|
04-18-2002, 11:16 PM
|
#8 |
|
Registered User
Join Date: Dec 1969
Location: Tampa EUROTRENDZ
Posts: 1,674
My Ride: X5 4.6 346hp & 330i
|
Should be doing mine soon...will do a review..shouldnt be too hard..
__________________
 |
|
|
|
|
04-19-2002, 12:00 AM
|
#9 |
|
X-Hamann99
|
u got more pics of yoru car?
__________________
 Any fool can drive in a straight line |
|
|
|
|
04-19-2002, 01:20 AM
|
#10 |
|
Sick of Modding my car
Join Date: Dec 1969
Location: Scottsdale&Seattle
Posts: 447
My Ride: 02 325ci,645cic,550i
 |
I got my fenders rolled at Car Nutz and its perfectly fine!
__________________
 |
|
|
|
|
04-19-2002, 04:17 AM
|
#11 |
|
Registered User
|
HOLY MAMA!!! Man, that looks bad! Don't worry about fender rolling. It will not chip your paint. They aren't pulling your fenders, just modifying the inside to accommodate the wheels. Have them switch the tires from left to right and you will never see those ugly marks again
__________________
 Sig by Jojo//Celsius One |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
