How to Move the Ac Controls...Help!! - E46Fanatics E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Go Back   E46Fanatics > Tuning & Tech > DIY: Do It Yourself

DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need!

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 08-09-2005, 12:38 PM   #1
Pier
Registered User
 
Join Date: Jun 2002
Location: ROCHESTER
Posts: 150
My Ride: M3
Send a message via AIM to Pier
How to Move the Ac Controls...Help!!

Does anyone know how to move the ac controls from under my cd player to the lower portion where my sunglass holder is? Is there a DIY on it?

Also any pictures on the spacing that is between the controls and the air ducts. Has anyone measured it before?
Pier is offline   Reply With Quote
Old 08-09-2005, 01:06 PM   #2
ca1242
Registered User
 
Join Date: Aug 2003
Location: Burke, VA
Posts: 7,635
My Ride: 2003 330i
Quote:
Originally Posted by Pier
Does anyone know how to move the ac controls from under my cd player to the lower portion where my sunglass holder is? Is there a DIY on it?

Also any pictures on the spacing that is between the controls and the air ducts. Has anyone measured it before?
You need a new bracket from BMW (~$30 piece) to relocate the AC controls. Relatively simple procedure.

On the original location, the depth is shallow (without measuring, I would say around 4 inches, give or take).
__________________
ca1242 is offline   Reply With Quote
Old 08-09-2005, 01:44 PM   #3
ArtDMSU
Registered User
 
Join Date: May 2004
Location: Detroit
Posts: 182
My Ride: 3 series
Send a message via AIM to ArtDMSU Send a message via MSN to ArtDMSU
I would also like to do this DIY. If anyone posts how to do it I would love to know for when I get some gauges to put there!
ArtDMSU is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 08-09-2005, 04:06 PM   #4
ca1242
Registered User
 
Join Date: Aug 2003
Location: Burke, VA
Posts: 7,635
My Ride: 2003 330i
Quote:
Originally Posted by ArtDMSU
I would also like to do this DIY. If anyone posts how to do it I would love to know for when I get some gauges to put there!
I don't have any pics, but here's the steps:
1. get the carrier for the AC controls (bottom frame).
2. pull sunglass pocket out, remove 2 screws.
3. pull shift boot, remove two screws.
4. lift shift surround (or remove), remove two screws
5. carrier comes out, replace with new carrier after re-routing AC wires
6. AC controls just pull out.
__________________
ca1242 is offline   Reply With Quote
Old 08-10-2005, 12:04 PM   #5
markusmark
Registered User
 
Join Date: Aug 2003
Location: Virginia
Posts: 1,679
My Ride: 2001330Ci
Bracket p/n is 51168268891.
markusmark is offline   Reply With Quote
Old 08-10-2005, 12:08 PM   #6
ca1242
Registered User
 
Join Date: Aug 2003
Location: Burke, VA
Posts: 7,635
My Ride: 2003 330i
Quote:
Originally Posted by markusmark
Bracket p/n is 51168268891.
Is that for older or newer E46? There are two different types, the older cars had individual buttons in the middle, the newer ones just have one long piece that houses all the buttons (DSC, heated seats, etc)
__________________
ca1242 is offline   Reply With Quote
Old 08-10-2005, 12:51 PM   #7
markusmark
Registered User
 
Join Date: Aug 2003
Location: Virginia
Posts: 1,679
My Ride: 2001330Ci
Quote:
Originally Posted by ca1242
Is that for older or newer E46? There are two different types, the older cars had individual buttons in the middle, the newer ones just have one long piece that houses all the buttons (DSC, heated seats, etc)
The bracket is used when the car is equipped with the nav system. The HVAC controls are installed in place of the "sunglass holder." The bracket holds the switches for the DSC, etc., too.
markusmark is offline   Reply With Quote
Old 08-10-2005, 09:46 PM   #8
ArtDMSU
Registered User
 
Join Date: May 2004
Location: Detroit
Posts: 182
My Ride: 3 series
Send a message via AIM to ArtDMSU Send a message via MSN to ArtDMSU
Thanks guys I think I am going to move my AC down and then make a custom CF panel that will hold two gauges and a custom I-pod holder in that spot. I was thinking about an exhaust temp and volt meter for now. When I supercharge my car I will not have to spend time making a custom plate for the gauges and can put the necessary gauges in a plate that is already made.
ArtDMSU is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON



All times are GMT -5. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - VerticalScope Inc. All rights reserved.