E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > Bavarian Soundwerks' Mobile Electronics Forum

Bavarian Soundwerks' Mobile Electronics Forum
Have all your A/V and electronics questions answered here. Ipods, A/V, Radar Detectors Oh My!
Sponsored by Bavarian Soundwerks

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 09-27-2002, 02:18 AM   #1
racdyn4you
Registered User
 
Join Date: Dec 1969
Location: San Francisco
Posts: 407
My Ride: RR Sport
Send a message via AIM to racdyn4you
OHM's and bridging.

can someone explain these terms for me. Really would like ot understand them better. more terms and definition would be appreciated. thanks
racdyn4you is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.
Old 09-27-2002, 11:49 AM   #2
theJrod
Registered User
 
Join Date: Sep 2002
Location: Seattle
Posts: 64
My Ride: X5-sold, 330i, WRX
Ohm = a unit used to measure the electrical resistance of a circuit, called it's Impedance.

The higher the number, the more resistance the circuit has.

Speakers have a set impedance based on how their voice coil is wound. It can't be changed.

For an amp, an 8 ohm speaker is easier to drive than a 4 ohm speaker. The resistance is more in the 8 ohm, so the amp doesn't produce as much power. With the 4 ohm speaker, the resistance is less, so the amp produces more power.

If it was a perfect world, the amp would produce twice as much power every time you cut Impedance in half, but things like regulated power supplies, cheap components, and battery voltage prevent this.

All amplifiers have a limit, though. If you cut impedance down to 2 ohms in an amp only designed for 4 ohm loads, bad things happen. The components of the amplifier are only designed to produce so much power, and making them produce more will cause overheating and eventually fry the amp.

Bridging is simply combining two channels of an amp into one to provide more power. The old rule is that bridging an amp cuts the effective impedance in half. So a bridged amp powering a 4 ohm speaker means the amp is "seeing" a 2 ohm load. This isn't really accurate, but it's a good thing to keep in mind. When an amp is bridged, it puts a greater demand on the components. That's why many 2 channel amps are rated at 2 ohms in stereo operation, but only 4 ohms when bridged.

If you have dual voice coil speakers, or multiple speakers, you can wire them differently to achieve different Impedance for the circuit. Wiring two 4 ohm speakers in parallel with yield a 2 ohm load, and wiring them in series will yield an 8 ohm load. There are diagrams floating around on how to do this.
theJrod is offline   Reply With Quote
Old 09-30-2002, 01:47 PM   #3
rome5982
Registered User
 
Join Date: Sep 2002
Location: Palm Beach Gardens, FL
Posts: 454
My Ride: 99 323i
Great write up JRod! I have always wondered why most amps are rated at 4 ohms for bridged channels and 2 ohms individually.
__________________

18"ASA AR1/H&R CupKit/ECIS CAI/Stromung Exhaust/Zimmerman Rotors/Aluminum Interior Trim & Face Gauges/G2 Calipers/Clear Corners/Autometer Gauges/Mtech Front Bumper/Chrome Grill/UUC Shift Knob/OEM Rear Spoiler/Painted Moldings/Silver Gauge Rings/JL Audio 12W3V2 & 6.5 Coax/BA 6.5 ProSeries/Kicker KX600.4
rome5982 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 07:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use