|
|
|
|
||||||
|
DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
02-17-2006, 06:55 AM
|
#1 |
|
Registered User
|
Need Help: Xenon Retrofit
I have searched and found no help. My question is the housings that I have bought, the driver side will not fit (Due to me having an M3). I have gotten the relocation bracket and the wire is not long enough from the housing to the recloation place.
2 Options 1. Find out which aftermarket intake will allow this ballast to say conntected with the housing. 2. Find out what part I need to get the extended wires to the relocation point. Do I need a new ballast? If so what part number is that? Is there a special wiring? I have looked at realoem.com and it doesn't show extended wires from the ballast to the housing. Thanks for the help |
|
|
|
02-17-2006, 08:25 PM
|
#2 |
|
Registered User
|
Is there any way to free the wires. On my BiXenons there is plenty of slack to put the ballast wherever I want too.
__________________
Thinking about a Honda or VW Dont buy from East Coast Honda - VW Read about my experience here  Some people dream of speed-others create a damn jet powered shopping cart. Curious about VoIP and Vonage click here |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
