FS: Gruppe M Intake and RE Octane SSK

bbh03 · 04-10-2006, 01:29 PM

Both off my 330 and used for approx. 20k miles.

The Gruppe M is the carbon fiber variety and is one of the original ones, so it does not have the name plate. The filter element was just cleaned and I will include what remains of the cleaning kit (about half full). It is in excellent condition with the exception of the foam rubber that trims the front edge is torn. This has no impact on operation and the tear is where you cannot see it installed. This could easily be replaced with a strip of foam weatherstripping. I will include the piece of black tubing and hose claps that I used to adapt it to the 330 MAF. If you have a 328 or 325 or whatever, you may have to make a trip to your local plumbing store for a different size adapter.

The Rogue Engineering Octane SSK is in excellent condition. I will remove it from my car this week. Includes all parts, but not an extra clip - you will have to reuse the one on your car (or get a new one from your dealer for about $1 if you break it). This is the model designed to fit 330 or 328 with a 5 speed transmission.

Feel free to ask questions or make an offer. I'll try and get pics of the Gruppe M tonight (its out of the car now).

I///Mraspy · 04-10-2006, 02:55 PM

PM sent

bbh03 · 04-11-2006, 07:42 PM

Pics of the GruppeM. Tear in edge rubber highlighted.

schutney · 04-12-2006, 12:18 AM

will the ssk fit an 03 325i

bbh03 · 04-12-2006, 08:12 AM

I don't think so.

bbh03 · 04-13-2006, 12:44 PM

Gruppe M is sold. Thanks!

Stealthwagen · 04-13-2006, 04:02 PM

I see 911 chain tensioner parts on the bench

Back to topic

bbh03 · 04-13-2006, 04:26 PM

You have a good eye, my friend! 78 911SC rebuild in progress. Going to 98mm P&C bump to 3.2L with 964 cams.

bbh03 · 05-04-2006, 05:27 PM

Forgot about this. The SSK is still available. I have new delrin bushings for the carrier. $200 + s/h.

DenaliXTC · 05-06-2006, 03:08 PM

Quote:

Originally Posted by bbh03

Forgot about this. The SSK is still available. I have new delrin bushings for the carrier. $200 + s/h.

where in NJ u at?

bbh03 · 05-08-2006, 08:31 AM

Sorry, the SSK is sold. Thanks!

04-10-2006, 01:29 PM	#1
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	FS: Gruppe M Intake and RE Octane SSK Both off my 330 and used for approx. 20k miles. The Gruppe M is the carbon fiber variety and is one of the original ones, so it does not have the name plate. The filter element was just cleaned and I will include what remains of the cleaning kit (about half full). It is in excellent condition with the exception of the foam rubber that trims the front edge is torn. This has no impact on operation and the tear is where you cannot see it installed. This could easily be replaced with a strip of foam weatherstripping. I will include the piece of black tubing and hose claps that I used to adapt it to the 330 MAF. If you have a 328 or 325 or whatever, you may have to make a trip to your local plumbing store for a different size adapter. The Rogue Engineering Octane SSK is in excellent condition. I will remove it from my car this week. Includes all parts, but not an extra clip - you will have to reuse the one on your car (or get a new one from your dealer for about $1 if you break it). This is the model designed to fit 330 or 328 with a 5 speed transmission. Feel free to ask questions or make an offer. I'll try and get pics of the Gruppe M tonight (its out of the car now). Last edited by bbh03; 04-10-2006 at 01:33 PM.

04-10-2006, 02:55 PM	#2
I///Mraspy Registered User Join Date: Mar 2005 Location: Raleigh, NC Posts: 135 My Ride: 2001 M3 - Steel Grey View My Garage	PM sent __________________ Needs mods....

04-11-2006, 07:42 PM	#3
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	Pics of the GruppeM. Tear in edge rubber highlighted. Attached Thumbnails

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

04-12-2006, 12:18 AM	#4
schutney Registered User Join Date: Aug 2005 Location: edmonton alberta canada Posts: 130 My Ride: 03 325i View My Garage	will the ssk fit an 03 325i

04-12-2006, 08:12 AM	#5
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	I don't think so.

04-13-2006, 12:44 PM	#6
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	Gruppe M is sold. Thanks!

04-13-2006, 04:02 PM	#7
Stealthwagen Registered User Join Date: Apr 2002 Location: Houston Posts: 286 My Ride: '00 323iT / S54 6Spd View My Garage	I see 911 chain tensioner parts on the bench Back to topic

04-13-2006, 04:26 PM	#8
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	You have a good eye, my friend! 78 911SC rebuild in progress. Going to 98mm P&C bump to 3.2L with 964 cams.

05-04-2006, 05:27 PM	#9
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	Forgot about this. The SSK is still available. I have new delrin bushings for the carrier. $200 + s/h.

05-08-2006, 08:31 AM	#11
bbh03 ... Join Date: May 2003 Location: NJ Posts: 1,335 My Ride: M5, X5, 911SC View My Garage	Sorry, the SSK is sold. Thanks!