puddle lights?

where to wire them?

Per our instructions, the puddle lights should be wired by running the positive and negative/ground into the engine bay, through the empty compartment and into the glove box. From there you can tap the footwell lights for trigger and power.

i dont think i have foot well lights
maybe ill just put them on a switch so i can have them on whenever i want

If you don't have footwell lights then do the same as I did but extend and run the wire up the A-pillar, across the windshield and tap into the interior center dome light.

Originally Posted by Nick@Jlevi SW

If you don't have footwell lights then do the same as I did but extend and run the wire up the A-pillar, across the windshield and tap into the interior center dome light.

can you tell me first how to get the wire into my car?
through where?

Originally Posted by win-by-miles

can you tell me first how to get the wire into my car?
through where?

look in your engine bay, you have ECU area on driver side and sorta an empty hole on passenger side, look down into it and you will see some wires with some ruber covering. thats where you can run a wire from the engine bay into the glove box.

Originally Posted by Nick@Jlevi SW

Per our instructions, the puddle lights should be wired by running the positive and negative/ground into the engine bay, through the empty compartment and into the glove box. From there you can tap the footwell lights for trigger and power.

Already told you

oh thanks, but whats the ECU?

first of all, how do you get wire from the sideskirt into the engine bay? I wanted to do this mod, but getting the wire into the engine bay worry me.

Originally Posted by racingheart

first of all, how do you get wire from the sideskirt into the engine bay? I wanted to do this mod, but getting the wire into the engine bay worry me.

Through the fender liner.

Exactly. You run it through the fender liner and into the engine bay