Tail light warning fuse???

3onDubs · 12-01-2006, 01:02 PM

Does anyone know which fuse to pull to get the lights out warning for the tail and headlights to disappear? I have an 04 sedan......both headlights and both tail light lights-out warnings are appearing on my dash.

3onDubs · 02-28-2007, 11:32 AM

Thanks for the loads of support guys....

...does anyone know if pulling fuse 32 will take care of both sets (headlight and tails) or just the headlight warning?

Edison@JleviSW · 02-28-2007, 12:24 PM

Fuse 32 is only related to the headlight out warning system, it will not prevent the tail light out warning./

3onDubs · 02-28-2007, 12:54 PM

^^^ Thanks...

Do you know if there is any way other than using resistors to get that warning to go away?

The reason I can't really use resistors is because I have aftermarket tails with a different connector...I would need to add a resistor for each bulb in the tail light.

12-01-2006, 01:02 PM	#1
3onDubs Registered User Join Date: Jul 2005 Location: yes Posts: 6,885 My Ride: no View My Garage	Tail light warning fuse??? Does anyone know which fuse to pull to get the lights out warning for the tail and headlights to disappear? I have an 04 sedan......both headlights and both tail light lights-out warnings are appearing on my dash.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

02-28-2007, 11:32 AM	#2
3onDubs Registered User Join Date: Jul 2005 Location: yes Posts: 6,885 My Ride: no View My Garage	Thanks for the loads of support guys.... ...does anyone know if pulling fuse 32 will take care of both sets (headlight and tails) or just the headlight warning?

02-28-2007, 12:24 PM	#3
Edison@JleviSW 1.888.JLEVISW Join Date: Apr 2002 Location: Santa Clara Posts: 28,337 My Ride: BMW Duh View My Garage	Fuse 32 is only related to the headlight out warning system, it will not prevent the tail light out warning./

02-28-2007, 12:54 PM	#4
3onDubs Registered User Join Date: Jul 2005 Location: yes Posts: 6,885 My Ride: no View My Garage	^^^ Thanks... Do you know if there is any way other than using resistors to get that warning to go away? The reason I can't really use resistors is because I have aftermarket tails with a different connector...I would need to add a resistor for each bulb in the tail light.