call me retarded but...

i have a 2002 330ci....i'm trying to install my silvervisions in the front, and when i look in that oval hole, i don't see a notch, but a little cylinder with a screw in it.......am i supposed to unscrew that???? for something that's supposed to be easy, i'm sure having a hard time with this....help please....:sad:

Unscrew that screw then use the screwdriver to push the indicator out.

For more help look in your instruction manual under replacing bulbs or something like that.

No, you don't need to unscrew anything. Look into that oval hole and with your screw driver, push down the plastic arm that locks the clear corner into place. It's a little tricky because the arm is located under some other junk so get a flashlight and look for it

Originally posted by presario
No, you don't need to unscrew anything. Look into that oval hole and with your screw driver, push down the plastic arm that locks the clear corner into place. It's a little tricky because the arm is located under some other junk so get a flashlight and look for it

if i remember correctly the 2002 models have a redesigned front blinker housing, and as stated do have screws... i dont know the details on it, but im 99% sure u do unscrew a screw:thumb:

--soheil

ok, i figured out how to get the light out...i unscrewed it and the clears popped out...changed the bulbs....now my new problem....the lenses won't sit flush anymore....i've been struggling to get it in right, but it won't go in flush with everything else....is there some science to this that i don't know about???