2000 323i Part Out

Ivegotissues666 · 01-31-2008, 05:57 PM

Like the title says I am hoping to clear this all out and get me stock parts back within the next 2 weeks.

1. Black Leather Sport Heated/Power Seats - Need non-sport manuals + Cash
2. Rear Fold Down HEATED SEATS - Need your fold down seats + Cash
3. Heated Steering 4 spoke wheel from a 99-01 E39 5 series, I will include slip ring but I will need yours in trade, plus your wheel NON-MFL is fine + Cash
4. 2 Mirror Memory Modules ($80 each) + 6 Pin Autofolding Switch with Maroon backing and M3 rep Autofolding 12pin painted Titanium Silver- $400 shipped
5. UUC Pullies used for ~ 10k miles still in good condition - Will need your pullies + $50 Cash
6. Dinan CF CAI with extra filter and water sock jacket, DINAN Label is peeling off a little but nothing major that couldn't be fixed, this was originally for a 330 but I have it on my 323i and it works fine (All I did was use a rubber sleeve around the lip of my MAF sensor to make the Diameter fit snugly on the intake tubing) - $275 OBO
7. Black Leather Armrest - I will need your center console + $100
8. UUC SSK + DSSR - I would need your stock shifter + $300 only 10k on it
9. Voltage Stablizer (Forget the name) I paid around $70 shipped I believe and it wasn't the ones floating around on ebay - $40 shipped

Pictures will come on this weekend, if you need something not listed let me know.

Thanks Jared

georgiev · 01-31-2008, 06:49 PM

good luck. what are u getting next?

Sam 330ci · 01-31-2008, 07:45 PM

How do you have heated REAR seats?

I'm interested (and local) if you could give me some details

rapid · 01-31-2008, 08:43 PM

is it a PITA to install power seats into a manual seat car? i've got nonsport manuals..

hi its me alec · 01-31-2008, 09:33 PM

whoa you actually went through with the rear heated seats? details?

props!!

CJW2OO4 · 01-31-2008, 09:57 PM

sent you a pm

motaboata · 01-31-2008, 10:51 PM

wtf wish i had the cash for number 7

Ivegotissues666 · 02-01-2008, 06:47 AM

I think I am going to be getting an E30 eventually, nothing as of yet though however I'll still frequent these forums.

As for all the questions about the rear heated seats it's simple I simply bought another pair of OEM heated elements and had my upholstry guy put them in the rear seats which was actually simplier than the fronts. I prewired my car however never got around to finishing up connecting them to the individual heated buttons I planned on purchasing. But they will work just like OEM. I was going to mount them right behnd the center console.

Installing power seats into a nonpower seat car is not difficult.

Jared

rapid · 02-01-2008, 09:47 AM

Quote:

Originally Posted by Ivegotissues666

Installing power seats into a nonpower seat car is not difficult.

Nice to hear that. I've got nonsport manuals I could swap with you. How much cash are you looking to get w/ them?

mx3mike · 02-01-2008, 12:48 PM

not to get off topic please pm the info on the wiring for the seats, i purchased the power heated seats and the connector from the car is there just no motion for the plug and play

Ivegotissues666 · 02-01-2008, 04:39 PM

Quote:

Originally Posted by rapid

Nice to hear that. I've got nonsport manuals I could swap with you. How much cash are you looking to get w/ them?

Your seats plus like $300 cash, mine are in good condition.

And to the other poster here is the heated seat PDF file:

http://www.angelfire.com/myband2/ds/...ts-English.pdf

Jared

Ivegotissues666 · 02-02-2008, 02:23 PM

Pictures as promised if you need any other pictures let me know.

Jared

ineedacaddy · 02-02-2008, 08:22 PM

what are you doing with the car?

BMW603 · 02-02-2008, 10:32 PM

Really interested in the seats and I am local. Problem is I have gray interior I would trade. Don't know if youd want to not sure what you're doing with the car. And my seats are heated power non sport. Maybe we could swap just the seat covers or something. Let me know if you're interested PM me or something if you are with a price youd want with the trade. Thanks

Ivegotissues666 · 02-03-2008, 08:21 AM

Quote:

Originally Posted by BMW603

Really interested in the seats and I am local. Problem is I have gray interior I would trade. Don't know if youd want to not sure what you're doing with the car. And my seats are heated power non sport. Maybe we could swap just the seat covers or something. Let me know if you're interested PM me or something if you are with a price youd want with the trade. Thanks

I'd like to just keep my whole interior the same and swap the seats only since I plan on selling the car.

Quote:

Originally Posted by ineedacaddy

what are you doing with the car?

Just plan on selling the car.

Jared

SammyV · 02-04-2008, 05:20 PM

bump for a very legit guy

Ivegotissues666 · 02-05-2008, 05:17 PM

Quote:

Originally Posted by SammyV

bump for a very legit guy

Thanks and BUMP to the top

99dinan3SD · 02-05-2008, 10:55 PM

sent you a pm on the UUC I'm interested

Arrows · 02-19-2008, 01:57 PM

Willing to sell the pullies outright? PM me.

01-31-2008, 05:57 PM	#1
Ivegotissues666 Registered User Join Date: Jul 2004 Location: Boston, MA Posts: 1,014 My Ride: 88' BMW E30 SETA View My Garage	2000 323i Part Out Like the title says I am hoping to clear this all out and get me stock parts back within the next 2 weeks. 1. Black Leather Sport Heated/Power Seats - Need non-sport manuals + Cash 2. Rear Fold Down HEATED SEATS - Need your fold down seats + Cash 3. Heated Steering 4 spoke wheel from a 99-01 E39 5 series, I will include slip ring but I will need yours in trade, plus your wheel NON-MFL is fine + Cash 4. 2 Mirror Memory Modules ($80 each) + 6 Pin Autofolding Switch with Maroon backing and M3 rep Autofolding 12pin painted Titanium Silver- $400 shipped 5. UUC Pullies used for ~ 10k miles still in good condition - Will need your pullies + $50 Cash 6. Dinan CF CAI with extra filter and water sock jacket, DINAN Label is peeling off a little but nothing major that couldn't be fixed, this was originally for a 330 but I have it on my 323i and it works fine (All I did was use a rubber sleeve around the lip of my MAF sensor to make the Diameter fit snugly on the intake tubing) - $275 OBO 7. Black Leather Armrest - I will need your center console + $100 8. UUC SSK + DSSR - I would need your stock shifter + $300 only 10k on it 9. Voltage Stablizer (Forget the name) I paid around $70 shipped I believe and it wasn't the ones floating around on ebay - $40 shipped Pictures will come on this weekend, if you need something not listed let me know. Thanks Jared __________________ Check out my Other DIY's Auto <---> 5 Speed Transmission Swap Heated Steering Wheel Heated Seat Retrofit Power Seat Retrofit UUC Pulleys Post-Cat + Pre-Cat O2 Sensors OEM Footwell Lighting Fog Light Retrofit OEM Driveshaft Rebuild/Repair

01-31-2008, 06:49 PM	#2
georgiev Registered User Join Date: Jan 2006 Location: Habsburg Posts: 3,390 My Ride: BA3 2105 View My Garage	good luck. what are u getting next? __________________

01-31-2008, 07:45 PM	#3
Sam 330ci Registered User Join Date: Nov 2006 Location: Salem NH Posts: 3,563 My Ride: 3 Pedals - 3 Litres View My Garage	How do you have heated REAR seats? I'm interested (and local) if you could give me some details __________________

01-31-2008, 08:43 PM	#4
rapid Registered User Join Date: Jun 2003 Location: Boston/NJ Posts: 334 My Ride: 03 sedan View My Garage	is it a PITA to install power seats into a manual seat car? i've got nonsport manuals.. __________________

01-31-2008, 09:33 PM	#5
hi its me alec Registered User Join Date: Oct 2004 Location: Minneapolis, MN Posts: 14,794 My Ride: BMWs + 1988 Pathy View My Garage	whoa you actually went through with the rear heated seats? details? props!! __________________

01-31-2008, 09:57 PM	#6
CJW2OO4 Registered User Join Date: Jul 2005 Location: Boston, Ma Posts: 1,557 My Ride: LANDSHARK View My Garage	sent you a pm

01-31-2008, 10:51 PM	#7
motaboata Registered User Join Date: Nov 2007 Location: MASS Posts: 89 My Ride: 2000 BMW 323I View My Garage	wtf wish i had the cash for number 7 __________________ Sousa's Custom Creations Custom decals and Clothing. Made to order! PM me for details!

02-01-2008, 06:47 AM	#8
Ivegotissues666 Registered User Join Date: Jul 2004 Location: Boston, MA Posts: 1,014 My Ride: 88' BMW E30 SETA View My Garage	I think I am going to be getting an E30 eventually, nothing as of yet though however I'll still frequent these forums. As for all the questions about the rear heated seats it's simple I simply bought another pair of OEM heated elements and had my upholstry guy put them in the rear seats which was actually simplier than the fronts. I prewired my car however never got around to finishing up connecting them to the individual heated buttons I planned on purchasing. But they will work just like OEM. I was going to mount them right behnd the center console. Installing power seats into a nonpower seat car is not difficult. Jared __________________ Check out my Other DIY's Auto <---> 5 Speed Transmission Swap Heated Steering Wheel Heated Seat Retrofit Power Seat Retrofit UUC Pulleys Post-Cat + Pre-Cat O2 Sensors OEM Footwell Lighting Fog Light Retrofit OEM Driveshaft Rebuild/Repair

02-01-2008, 12:48 PM	#10
mx3mike Registered User Join Date: Apr 2007 Location: Northern NJ Posts: 18 My Ride: 2000 323i View My Garage	not to get off topic please pm the info on the wiring for the seats, i purchased the power heated seats and the connector from the car is there just no motion for the plug and play

02-02-2008, 02:23 PM	#12
Ivegotissues666 Registered User Join Date: Jul 2004 Location: Boston, MA Posts: 1,014 My Ride: 88' BMW E30 SETA View My Garage	Pictures as promised if you need any other pictures let me know. Jared __________________ Check out my Other DIY's Auto <---> 5 Speed Transmission Swap Heated Steering Wheel Heated Seat Retrofit Power Seat Retrofit UUC Pulleys Post-Cat + Pre-Cat O2 Sensors OEM Footwell Lighting Fog Light Retrofit OEM Driveshaft Rebuild/Repair

02-02-2008, 08:22 PM	#13
ineedacaddy Registered User Join Date: Mar 2006 Location: USA Posts: 163 My Ride: E46 View My Garage	what are you doing with the car? __________________ bla bla

02-02-2008, 10:32 PM	#14
BMW603 Registered User Join Date: Jan 2008 Location: Salem NH Posts: 63 My Ride: 99 323i View My Garage	Really interested in the seats and I am local. Problem is I have gray interior I would trade. Don't know if youd want to not sure what you're doing with the car. And my seats are heated power non sport. Maybe we could swap just the seat covers or something. Let me know if you're interested PM me or something if you are with a price youd want with the trade. Thanks

02-04-2008, 05:20 PM	#16
SammyV Registered User Join Date: Sep 2004 Location: Hoboken / Long Island Posts: 1,378 My Ride: CB M3 View My Garage	bump for a very legit guy

02-05-2008, 10:55 PM	#18
99dinan3SD Registered User Join Date: Sep 2007 Location: Bellevue, WA Posts: 25 My Ride: BMW 328i Sport View My Garage	sent you a pm on the UUC I'm interested __________________ Fubu shirt - $50 Rocca Wear sweatshirt - $80 Sean John hat - $30 Realizing you're white... - * priceless * Did I forget to mention my car can fly?!

02-19-2008, 01:57 PM	#19
Arrows Registered User Join Date: May 2006 Location: Santa Clara, CA Posts: 42,105 My Ride: 2000 323i. View My Garage	Willing to sell the pullies outright? PM me.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: