2003 M3 part-out

maxxfish · 03-08-2008, 10:07 AM

I still have a bunch of stuff left from my 2003 complete partout:

Delage Airbox, a few scratches, includes stainless braided breather hose, will work for SMG or 6-speed (I will include vacuum plugs if needed). Also missing one of the lower rubbber mounting pads, but still mounts solidly. Here it is in my 2003, then in my E36 racecar (with S54 swap). Does not need software to run (I ran it in my racecar with a stock flash, now selling as I am going to standalone engine management). $1000 shipped to lower 48. (Firm)

Delage lightweight flywheel (13 pounds) and mint BMW flywheel/pressure plate for M3. The flywheel alone is 785 Euros new plus shipping. http://www.delagesport.com/index2.html
Selling all for $450 shipped to lower 48.

Rear bumper in carbon black with support (paint damage on passenger side) (sorry, it's in my garage rafters!)

All of this stuff (but the SMG knob is sold)

I also have an AC compressor, stock oil cooler and lines, ABS unit, brake booster, pedals with Kelleners Sport pads, general module, DME, EWS, key (all matching, and DME will need a reflash) stock fuse block, modified chassis harness, sensors, dash and dash bar, RAC Monolite wheels, etc.

Best serious offer unless price is stated. Located in Richmond, VA. Thanks, Max

DrusC5s · 03-08-2008, 01:13 PM

Hello, do you have a SMG dome cover for sale? Please let me know.

Thanks,
Dru

maxxfish · 03-08-2008, 01:32 PM

If it's not pictured or listed, I don't have it, sorry.

maxxfish · 03-11-2008, 08:43 PM

Delage intake and flywheel are sold, thanks!

Efterlyst27 · 03-11-2008, 09:37 PM

How about your CF engine cover? PM me

Snik · 03-11-2008, 09:40 PM

hold on, youre selling the entire ready to run engine for a grand?

FAK!! how can i make it work in my 328i 5sp?

Snik · 03-11-2008, 09:48 PM

how many miles on the engine.

maxxfish · 03-12-2008, 08:37 AM

Where does it say I'm selling the entire engine for a grand?

SWINFORD · 03-12-2008, 09:44 AM

I need the hood shocks pm me a price.

Snik · 03-12-2008, 12:37 PM

Quote:

Originally Posted by maxxfish

Where does it say I'm selling the entire engine for a grand?

oh, ok , hahahah, i knew i couldnt be reading right, the airbox is a grand. thats still a sweet deal.

WhiteOut323i · 03-19-2008, 11:33 PM

how much for the rear bumper and cf bar?

flashtoflight · 03-20-2008, 01:07 AM

what's your best price for these shipped to 92804?

do you have the C pillars also? proximity sensor alarm dome cover, 3rd brake light panel, sun visors, sunroof seal (that wraps the headliner into sunroof), grab handle? thanks

maxxfish · 03-20-2008, 07:05 AM

All PMs replied...

mikeson · 03-20-2008, 08:47 AM

I sent PM

tey elvis · 03-20-2008, 12:53 PM

Any antenna booster for my navigation retrofit?

The Nebulizer · 03-20-2008, 10:56 PM

I need some parts to replace my sundamaged black rubber, plastic...

I am looking for rear window rubber (both sides) - I think I see 1 around the SMG shifter - maybe the other is in the pile. Are these untorn?

How is the cup holder?

I may need the door rubber trim as well (piece attaches to metal door under the window).

Is that the cowl grill I see on the right (I just need the black plastic piece)? If so, how is that?

PM me prices please.

jonyb · 03-20-2008, 11:30 PM

Is that an M dead pedal I spy? How much to KY 42001? Paypal?

zeshon · 03-24-2008, 12:06 PM

Are your A. B, and C pillars still around? Pm me if so!

monkeyjuice5150 · 03-24-2008, 12:09 PM

Got my trunk shock in. Thanks.

Rayce185 · 03-25-2008, 12:07 AM

How much for the door seals on both sides?

03-08-2008, 10:07 AM	#1
maxxfish Registered User Join Date: Jun 2007 Location: Richmond, VA USA Posts: 24 My Ride: M3 View My Garage	2003 M3 part-out I still have a bunch of stuff left from my 2003 complete partout: Delage Airbox, a few scratches, includes stainless braided breather hose, will work for SMG or 6-speed (I will include vacuum plugs if needed). Also missing one of the lower rubbber mounting pads, but still mounts solidly. Here it is in my 2003, then in my E36 racecar (with S54 swap). Does not need software to run (I ran it in my racecar with a stock flash, now selling as I am going to standalone engine management). $1000 shipped to lower 48. (Firm) Delage lightweight flywheel (13 pounds) and mint BMW flywheel/pressure plate for M3. The flywheel alone is 785 Euros new plus shipping. http://www.delagesport.com/index2.html Selling all for $450 shipped to lower 48. Rear bumper in carbon black with support (paint damage on passenger side) (sorry, it's in my garage rafters!) All of this stuff (but the SMG knob is sold) I also have an AC compressor, stock oil cooler and lines, ABS unit, brake booster, pedals with Kelleners Sport pads, general module, DME, EWS, key (all matching, and DME will need a reflash) stock fuse block, modified chassis harness, sensors, dash and dash bar, RAC Monolite wheels, etc. Best serious offer unless price is stated. Located in Richmond, VA. Thanks, Max Last edited by maxxfish; 03-08-2008 at 10:10 AM.

03-08-2008, 01:13 PM	#2
DrusC5s Registered User Join Date: Jun 2006 Location: SF Bay Area Posts: 4,765 My Ride: 2004 CB M3 SMG II View My Garage	Hello, do you have a SMG dome cover for sale? Please let me know. Thanks, Dru __________________

03-12-2008, 09:44 AM	#9
SWINFORD ///PIITB Join Date: May 2006 Location: Albertville, Alabama Status: Motorboating Posts: 27,499 My Ride: Low Life Marie View My Garage	I need the hood shocks pm me a price. __________________ Swinford-Hypnotyzd : Dirty South-Swinny \| Hypnotyzd FB \|Tischer BMW\|

03-19-2008, 11:33 PM	#11
WhiteOut323i OEM ///Member Join Date: May 2004 Location: Michigan Posts: 1,403 My Ride: 2000 323i View My Garage	how much for the rear bumper and cf bar? __________________ *Transformation 3* http://www.youtube.com/watch?v=Sc7FSJPQIbM http://youtube.com/watch?v=lS_vAheWZrE http://youtube.com/watch?v=4KNlisuY8TA

03-20-2008, 08:47 AM	#14
mikeson Registered User Join Date: May 2004 Location: Orange County Posts: 900 My Ride: 99 323I View My Garage	I sent PM __________________ OEM xenon retrofit, Auto light/rain sensor DIY, OEM fog DIY,..........so many things DIY since 2000 :)

03-08-2008, 01:32 PM	#3
maxxfish Registered User Join Date: Jun 2007 Location: Richmond, VA USA Posts: 24 My Ride: M3 View My Garage	If it's not pictured or listed, I don't have it, sorry.

03-11-2008, 08:43 PM	#4
maxxfish Registered User Join Date: Jun 2007 Location: Richmond, VA USA Posts: 24 My Ride: M3 View My Garage	Delage intake and flywheel are sold, thanks!

03-11-2008, 09:37 PM	#5
Efterlyst27 Banned Join Date: Dec 2007 Location: East Lansing Posts: 264 My Ride: 2003 BMW M3 View My Garage	How about your CF engine cover? PM me

03-12-2008, 08:37 AM	#8
maxxfish Registered User Join Date: Jun 2007 Location: Richmond, VA USA Posts: 24 My Ride: M3 View My Garage	Where does it say I'm selling the entire engine for a grand?

03-20-2008, 01:07 AM	#12
flashtoflight Banned Join Date: Oct 2007 Location: SoCal (562) Posts: 8,654 My Ride: FS: 01' 330ci 5spd View My Garage	what's your best price for these shipped to 92804? do you have the C pillars also? proximity sensor alarm dome cover, 3rd brake light panel, sun visors, sunroof seal (that wraps the headliner into sunroof), grab handle? thanks

03-20-2008, 07:05 AM	#13
maxxfish Registered User Join Date: Jun 2007 Location: Richmond, VA USA Posts: 24 My Ride: M3 View My Garage	All PMs replied...

03-20-2008, 12:53 PM	#15
tey elvis Registered User Join Date: Jun 2004 Location: Singapore Posts: 60 My Ride: M3 Vert View My Garage	Any antenna booster for my navigation retrofit?

03-20-2008, 10:56 PM	#16
The Nebulizer Registered User Join Date: Dec 2005 Location: Indy Posts: 281 My Ride: LSB M3 & SC'd 325Ci View My Garage	I need some parts to replace my sundamaged black rubber, plastic... I am looking for rear window rubber (both sides) - I think I see 1 around the SMG shifter - maybe the other is in the pile. Are these untorn? How is the cup holder? I may need the door rubber trim as well (piece attaches to metal door under the window). Is that the cowl grill I see on the right (I just need the black plastic piece)? If so, how is that? PM me prices please. __________________ ... Last edited by The Nebulizer; 03-20-2008 at 11:00 PM.

03-20-2008, 11:30 PM	#17
jonyb Registered User Join Date: Mar 2008 Location: Paducah KY Posts: 79 My Ride: 03 M3 View My Garage	Is that an M dead pedal I spy? How much to KY 42001? Paypal?

03-24-2008, 12:06 PM	#18
zeshon Registered User Join Date: Jul 2006 Location: Washington Posts: 1,361 My Ride: S/C 2000 328Ci View My Garage	Are your A. B, and C pillars still around? Pm me if so! __________________ - Austin Favorite sponsors Bavarian Soundwerks \| Euro Spec Mods : Performance : Active Autowerkes Stage 1 C38 • New Subframe and TMS Rear Re-Enforcements • Upgraded VANOS seals • M3 Fuel Baffle • KW V2 • ZHP Control Arms • E60 Short Shifter • Sound : Bavarian Soundwereks Stage 2 • DICE iPod Link • Looks : Replica M3 Mirrors • Replica M3 Front Bumper • Matte Black Grillz • LED Signals

03-24-2008, 12:09 PM	#19
monkeyjuice5150 Registered User Join Date: Mar 2004 Location: San Ramon, CA Posts: 1,979 My Ride: ///M3 droptop View My Garage	Got my trunk shock in. Thanks. __________________

03-25-2008, 12:07 AM	#20
Rayce185 Modifiziertes ///Mitglied Join Date: Nov 2005 Posts: 27,078 View My Garage	How much for the door seals on both sides? __________________ \| \| \| \| dun dun duuuunnnn

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: