|
|
|
|
||||||
|
DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-05-2007, 02:49 PM
|
#1 |
|
Registered User
|
Wiring (Colors) ????
Im just got the CSL V.2 Bumpers and it came with some after market Fogs.
I need to splice some wires in order for them work, can some help with some wiring guide? I know for regular wiring.... Black - ground Red - Constant Yellow or white - Accessory But the wiring for the Fogs in my E46 is different? any help?
__________________
|
|
|
|
12-06-2007, 07:04 AM
|
#2 |
|
Registered User
|
couldnt u just tap into the wires that r there for ur fogs now
|
|
|
|
|
12-06-2007, 12:41 PM
|
#3 |
|
Registered User
|
The wires that came in with the new fogs have the red wires and the black wires...the wires that are hooked up right now are in Brown/white and black I think. Not too sure which one is Power and ground.
__________________
|
|
|
|
|
12-06-2007, 01:24 PM
|
#4 |
|
Owner/Admin
|
Get a cheap multi-meter to be 100% sure. Brown is typically ground.
Tim
__________________
|
|
|
|
|
12-06-2007, 03:34 PM
|
#5 |
|
Registered User
|
cool....I'll try that today.
__________________
|
|
|
|
|
12-07-2007, 03:39 PM
|
#6 |
|
Registered User
|
If you have incandescent bulbs, polarity does not matter. If you have LED or HID bulbs, they would only work if connected with the correct polarity. Either way, just hooke them up; if doesn't work, switch polarity.
__________________
 |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
