Help Projector Install

5h3r42 · 02-05-2009, 03:28 PM

Hi just purchased these headlights please help need to know were to plug following cables thanx?

1-black and yellow
2-red and black
3-black and grey

help will be appreciated

thanx

5h3r42 · 02-06-2009, 08:54 AM

anyone?

CWABimmer · 02-06-2009, 09:16 AM

if you search your questions are answered exactly in another thread (I didn't know how to wire them either until reading it

)

sillieidiot · 02-07-2009, 07:51 PM

take a picture from the back of the headlight. that should help a lot.

but from what i can tell (going from left to right):
1. far left one goes to the angel eyes. you don't plug them anywhere. you need to cut off the end connectors and splice them into something.
2. i'm pretty sure it's just nothing. you don't need to use that.
3. the part for the ballast, the headlight connector from the car goes there.
4. that's your high beam plug

5h3r42 · 02-08-2009, 07:26 AM

finally managed to fit them in

02-05-2009, 03:28 PM	#1
5h3r42 Registered User Join Date: Jan 2009 Location: london Posts: 50 My Ride: 325ci msport View My Garage	Help Depo Projector Install Hi just purchased these headlights please help need to know were to plug following cables thanx? 1-black and yellow 2-red and black 3-black and grey help will be appreciated thanx Attached Thumbnails __________________ Last edited by 5h3r42; 02-06-2009 at 04:12 AM.

02-06-2009, 08:54 AM	#2
5h3r42 Registered User Join Date: Jan 2009 Location: london Posts: 50 My Ride: 325ci msport View My Garage	anyone? __________________

02-06-2009, 09:16 AM	#3
CWABimmer Registered User Join Date: Jun 2007 Location: Tacoma, Washington / Claremont, CA Posts: 1,315 My Ride: '01 AW on Black 325i View My Garage	if you search your questions are answered exactly in another thread (I didn't know how to wire them either until reading it ) __________________ [IMG]http://************/c5zumy[/IMG] ChrisTKHarris's Official Apprentice 19" HM2s \| H&R Cupkit & Sways \| BMP RSMs \| AFE Intake \| UUC TSE3 \| RE Underdrive Pulleys \| Schroth QFPs \| 20% Tint \| OEM Clears \| Tinted Tails \| Umnitza 50w P46s w/ Orion V2s \| Silvannia Mirrored Bulbs \| Jlevi LED Reverse, Sidemarker, & License Plate Lights \| Bimmian Blacked Out Roundels, Black Handbrake Handle, ACS-Style Pedals, & Xenon Interior Lights \| Custom Boots

02-07-2009, 07:51 PM	#4
sillieidiot Registered User Join Date: Sep 2004 Location: the OC Posts: 43,345 My Ride: '06 AW 330ci View My Garage	take a picture from the back of the headlight. that should help a lot. but from what i can tell (going from left to right): 1. far left one goes to the angel eyes. you don't plug them anywhere. you need to cut off the end connectors and splice them into something. 2. i'm pretty sure it's just nothing. you don't need to use that. 3. the part for the ballast, the headlight connector from the car goes there. 4. that's your high beam plug __________________ I like to reply to threads with 0 posts Have a lighting problem? Read this first: Lighting-related Troubleshooting Guide

02-08-2009, 07:26 AM	#5
5h3r42 Registered User Join Date: Jan 2009 Location: london Posts: 50 My Ride: 325ci msport View My Garage	finally managed to fit them in __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: