***Official SF Bay Area Sightings/General Thread***

Originally Posted by TKC

kalim, Where did you say jay got his hood from again?
thxklx

Anatoliy (916) 396-3727

Originally Posted by TKC

why don't I just sell my motorcycle, sell my car, sell my supercharger, and buy a prius?

a prius? Naw... that's too extreme, you need something a bit more tame... like a Fit

Originally Posted by TKC

why don't I just sell my motorcycle, sell my car, sell my supercharger, and buy a prius?

Sent from my PG86100 using Bimmer App

Originally Posted by TKC

Almost $2k for the Kaaz

The 3.38 in my car at the moment is not the stock one. My stock diff was a 3.07.

Right now, when cruising at 80-85 on the freeway, I'm at over 4k rpm.
When I go WOT from a stop light, 1st gear is very, very short, so with the SC, it's like I won't have a first gear at all except to scoot around parking lots.

So rather going back down to the 3.07, I thought I'd go down to the 3.23 or 3.15.

If you find one, make sure it matches the bolt pattern of your drive shaft (should be 6-bolt, not 4-bolt). You can swap diff input shafts if you need to, but you'll want to take it to a shop to get the lash set correctly.

Get a supercharged Prius!

Originally Posted by cyberkaa

Anatoliy (916) 396-3727

THXKLX!

Originally Posted by mtnbound

Probably Anatoliy's in Sac.

Originally Posted by albeee

Tobehhh is buying another supercharguh for the vert?

Originally Posted by TKC

All the cool verts have them.

Any vert that doesn't have one is

You don't want to be , do you dave?

The answer to this isn't obvious.

Originally Posted by TKC

why don't I just sell my motorcycle, sell my car, sell my supercharger, and buy a prius?

Originally Posted by cyberkaa

If you find one, make sure it matches the bolt pattern of your drive shaft (should be 6-bolt, not 4-bolt). You can swap diff input shafts if you need to, but you'll want to take it to a shop to get the lash set correctly.

why klx no set lash?

Albee told me one of your favorite things to do is lash him.

Originally Posted by TKC

THXKLX!




[IMGhttp://i699.photobucket.com/albums/vv353/tkc330cic/sc.jpg[/IMG]

No probrem.



So pretty.

Originally Posted by |K T D|

why klx no set lash?

Albee told me one of your favorite things to do is lash him.

Because you need ALL THE TORQUE WRENCHES!

And probably a lot of crush sleeves.

Originally Posted by cyberkaa

Because you need ALL THE TORQUE WRENCHES!

pshaw... but you're always fully torqued Kalim... that's what makes you so cool with a wrench.

Originally Posted by |K T D|

why klx no set lash?

Albee told me one of your favorite things to do is lash him.

Miles is the whipping boy.

Locals... Anyone want a set of ccfl angel eyes. Never installed with ballasts. No harness. I think this set would fit better on non face lift. For those that remember, I got it from norcaleinstein.

Sent from my SCH-I535 using Bimmer App

Wow, congrats Toby! Take me for a spin when I visit. Minimum 100 mph.

Originally Posted by |K T D|

pshaw... but you're always fully torqued Kalim... that's what makes you so cool with a wrench.

I play it cool like that.

Originally Posted by dmisc

Locals... Anyone want a set of ccfl angel eyes. Never installed with ballasts. No harness. I think this set would fit better on non face lift. For those that remember, I got it from norcaleinstein.

Sent from my SCH-I535 using Bimmer App

Hey Dan

kalim

Sent from my SCH-I535 using Bimmer App

We'll have to do another canyon cruise once the blower is in.