HELP! 3M Super 77 Glue Spray

miiikey31 · 01-10-2010, 07:43 AM

Hey guys,
I finally finished my door handle on the driver's side and got some glue spray on the CF wrap. ANY SUGGESTIONS ON GETTING IT OFF? CLEANING METHODS FOR THE CF WRAP? I dont really know what fabric its like so i dont know how to clean it.

grafiksguy · 01-10-2010, 07:44 AM

You might try looking on the label for info, 3M website or an 800 number for customer questions.

jfoj · 01-10-2010, 08:16 AM

Might try something like Goof Off or lighter fluid. Ronsonol Lighter type fluid. I use lighter fluid all the time to remove adhesive residue.

In a pinch you could also us charcoal barbecue lighter fluid as well.

Not sure this will dissolve your adhesive, but should soften it enough to work it off the material??

Try some on a scrap piece of material before you go at the finished product to make sure there are no issues.

After using the petroleum based product, you can use rubbing alcohol or Windex usually as a final clean up.

Good luck.

jfoj

01-10-2010, 07:43 AM	#1
miiikey31 Registered User Join Date: Jan 2009 Location: socal Posts: 160 My Ride: 00 BMW 323CI Coupe View My Garage	HELP! 3M Super 77 Glue Spray Hey guys, I finally finished my door handle on the driver's side and got some glue spray on the CF wrap. ANY SUGGESTIONS ON GETTING IT OFF? CLEANING METHODS FOR THE CF WRAP? I dont really know what fabric its like so i dont know how to clean it.

01-10-2010, 07:44 AM	#2
grafiksguy Registered User Join Date: Mar 2007 Location: Maplewood, New Jersey Posts: 1,176 My Ride: 2010 328xi View My Garage	You might try looking on the label for info, 3M website or an 800 number for customer questions. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-10-2010, 08:16 AM	#3
jfoj Registered User Join Date: Nov 2009 Location: Fairfax, VA USA Posts: 5,336 My Ride: '06 330CiC, '03 M5 View My Garage	Might try something like Goof Off or lighter fluid. Ronsonol Lighter type fluid. I use lighter fluid all the time to remove adhesive residue. In a pinch you could also us charcoal barbecue lighter fluid as well. Not sure this will dissolve your adhesive, but should soften it enough to work it off the material?? Try some on a scrap piece of material before you go at the finished product to make sure there are no issues. After using the petroleum based product, you can use rubbing alcohol or Windex usually as a final clean up. Good luck. jfoj