Cure times for Sealant, Glaze and Wax

tinkwithanr · 09-06-2009, 11:02 PM

Okay, So I'm just finishing up the polishing on my '00 Siena Red 323i, and I was wondering if I needed to wait between applying the Glaze, Sealant, and Wax. I know that if I was going to do more than one coat of any of them, then there is a cure time of 12-24 hours, but I couldn't find any info for cure times when I'm only doing one coat of each.

Thanks in advance for the help!

Jonathan

trippmann · 09-06-2009, 11:08 PM

what type of glaze?

stolidog · 09-06-2009, 11:50 PM

I think it depends on the product. But I do know that JetSeal 109 says to wait 20 minutes before putting anything over it. I really dont think you need to wait 12-24 hours.

Shuskan3 · 09-07-2009, 12:48 AM

As already mentioned, it all depends on the product.

tinkwithanr · 09-07-2009, 10:05 AM

Thanks for the responses, I'm using FMJ, Menzerna Finishing Glaze and Supernatural.

09-06-2009, 11:02 PM	#1
tinkwithanr Registered User Join Date: Oct 2006 Location: Springfield OH Posts: 703 My Ride: '00 323i + '75 2002 View My Garage	Cure times for Sealant, Glaze and Wax Okay, So I'm just finishing up the polishing on my '00 Siena Red 323i, and I was wondering if I needed to wait between applying the Glaze, Sealant, and Wax. I know that if I was going to do more than one coat of any of them, then there is a cure time of 12-24 hours, but I couldn't find any info for cure times when I'm only doing one coat of each. Thanks in advance for the help! Jonathan __________________ ^^Mica_____________________________Fiona^^

09-07-2009, 12:48 AM	#4
Shuskan3 Registered User Join Date: Dec 2006 Location: College Station, TX Posts: 793 My Ride: 2004 M3 View My Garage	As already mentioned, it all depends on the product. __________________ 2004 Carbon Black/Grey BMW M3 Hardwired V1 ~ Turner Motorsport Front and Rear Sways w/ Ground Control Endlinks ~ Powerflex RTAB’s ~ OEM BMW Performance SSK ~ ZHP Shift Knob ~ Painted Reflectors ~ Bluetooth ~ Satellite Radio ~ CDV Delete ~ Clutch Stop ~ Euro Tray ~ 19” CSL Wheels ~ 18” OEM Wheels for the track

09-07-2009, 10:05 AM	#5
tinkwithanr Registered User Join Date: Oct 2006 Location: Springfield OH Posts: 703 My Ride: '00 323i + '75 2002 View My Garage	Thanks for the responses, I'm using FMJ, Menzerna Finishing Glaze and Supernatural. __________________ ^^Mica_____________________________Fiona^^

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

09-06-2009, 11:50 PM	#3
stolidog Registered User Join Date: Aug 2005 Location: Seattle Posts: 746 My Ride: 2004 M3 6spd View My Garage	I think it depends on the product. But I do know that JetSeal 109 says to wait 20 minutes before putting anything over it. I really dont think you need to wait 12-24 hours.