Engine & Performance
Everything to make your car faster! Air intakes, superchargers, turbos, flywheel & clutch, differentials, chips, short shift kits, exhausts, etc.....
||Thread Tools||Search this Thread||Rate Thread||Display Modes|
|03-15-2011, 05:12 PM||#1|
Join Date: Dec 2003
Location: Denver, Colorado
My Ride: 2006 M3 Coupe 6MT
FS: ECIS Intake Kit for E46 M3
ECIS Intake with HFM Tube for E46 M3
Purchased new from Custom Performance last year.
Put 3,000 miles on the kit.
The HFM tube is designed to take the MAF airflow piece from your stock intake. It's a perfect fit.
The HFM tube also has a perfect fit for the MAF sensor; just like on the stock intake.
The kit includes:
a. Fiberglass heat shield and rubber moldings.
b. HFM tube, where you use your stock MAF airflow piece, and re-use your stock MAF torx t20 security screws.
c. ECIS Conical Air Filter and clamp, plus a 2nd, never been used, ECIS Conical Air Filter and clamp.
d. Torx T-20 security wrench to remove and install the MAF.
e. Instructions for installation, and to remove the MAF airflow piece from the stock airbox.
Price new from Custom Performance is $399.
Asking $250, including shipping, to domestic U.S. locations.
Last edited by normcaldwell; 03-17-2011 at 11:49 AM.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|