**official mineapolis general thread**

Originally Posted by BrianMN

Hey Guys, just wanted to let you know that I'm setting up a Dyno Day November 27th at MAPerformance in Plymouth!!!!! So far we've got 4-5 E90 335i's, a couple M3's, couple honda's, and a few others, so even if you don't want to get your car dyno'd you should come and hang out!

MAPerformance has an AWD Dynojet, so literally anyone can come. So far, it's likely going to be $60 for three pulls, but if 20 poeple come it'll be $50. By the way the weather's going, this will be before any snowfall and before winter tires time!

Hopefully this sparks some interest! Whadya guys think?

I'll be there with my slow ass 325.

If someone on here drives a blue m5 occasionally around lake calhoun or Harriet, please make yourself known . Beautiful car

Sent from my HERO200 using BimmerApp

Originally Posted by jhaurimn

If someone on here drives a blue m5 occasionally around lake calhoun or Harriet, please make yourself known . Beautiful car

Sent from my HERO200 using BimmerApp

E65 M5?
With aftermarket wheels with a lip?

Originally Posted by TrickTizzle

E65 M5?
With aftermarket wheels with a lip?

it looked (aprox) like a 2002, but after market wheels. i didnt get a good look at the front tho, he turned off as i was passing him.

Originally Posted by jhaurimn

it looked (aprox) like a 2002, but after market wheels. i didnt get a good look at the front tho, he turned off as i was passing him.

hmm....I think Dan here has a blue m5 of that generation...DinanS3 on here.

oem wheels here

Originally Posted by BrianMN

Hey Guys, just wanted to let you know that I'm setting up a Dyno Day November 27th at MAPerformance in Plymouth!!!!! So far we've got 4-5 E90 335i's, a couple M3's, couple honda's, and a few others, so even if you don't want to get your car dyno'd you should come and hang out!

MAPerformance has an AWD Dynojet, so literally anyone can come. So far, it's likely going to be $60 for three pulls, but if 20 poeple come it'll be $50. By the way the weather's going, this will be before any snowfall and before winter tires time!

Hopefully this sparks some interest! Whadya guys think?

Sweet! My car is at MAperformance getting zionsville radiator, and aquamist installed i hope it is done by then so i can have it dynoed, either way i will be there to check on my car and see other people dyno!

Originally Posted by jacobs323i

Sweet! My car is at MAperformance getting zionsville radiator, and aquamist installed i hope it is done by then so i can have it dynoed, either way i will be there to check on my car and see other people dyno!

aquamist??

water alchohol injection system

aquamist is a small nozzle that you mount by the rearview mirror, it sprays a mild mist at your face when it's too hot outside, it's really only useful when your car doesn't have AC because of the twarbo.

Originally Posted by hi its me alec

aquamist is a small nozzle that you mount by the rearview mirror, it sprays a mild mist at your face when it's too hot outside, it's really only useful when your car doesn't have AC because of the twarbo.

Hey, is anybody here willing to help me with my angel eyes? I just have a little problem, I connected everything together also the ECU wire tap and the angel eyes only worked for 2 minutes then stop working (but did look wonderful for those 2 minutes!). If anybody could help that would be great

I know this is a MN page, not a lighting page. But I thought to ask the fellow Minnesota fanatics first before making another thread. I can upload pictures if you guys want of the wiring/conntecting.

Also these are the two DIY I followed:
http://www.unitedbimmer.com/forums/l...guide-e46.html
http://www.khoalty.com/blog/bmw-diy/...l-eye-install/

Originally Posted by BMW4life46

Hey, is anybody here willing to help me with my angel eyes? I just have a little problem, I connected everything together also the ECU wire tap and the angel eyes only worked for 2 minutes then stop working (but did look wonderful for those 2 minutes!). If anybody could help that would be great

I know this is a MN page, not a lighting page. But I thought to ask the fellow Minnesota fanatics first before making another thread. I can upload pictures if you guys want of the wiring/conntecting.

Also these are the two DIY I followed:
http://www.unitedbimmer.com/forums/l...guide-e46.html
http://www.khoalty.com/blog/bmw-diy/...l-eye-install/

Which kit did you buy? Post some pics!
And double check your connections, Im sure something is just loose.

Originally Posted by TrickTizzle

Which kit did you buy? Post some pics!
And double check your connections, Im sure something is just loose.

I found out what it was! I put the ground wire onto a bolt that the DIY said that it was suppose to work(it didn't). I just changed it's spot and put it on the OEM ground location.

Got it to work, and went for a little drive in the snow! Great night, thanks for your help man

Originally Posted by BrianMN

Hey Guys, just wanted to let you know that I'm setting up a Dyno Day November 27th at MAPerformance in Plymouth!!!!! So far we've got 4-5 E90 335i's, a couple M3's, couple honda's, and a few others, so even if you don't want to get your car dyno'd you should come and hang out!

MAPerformance has an AWD Dynojet, so literally anyone can come. So far, it's likely going to be $60 for three pulls, but if 20 poeple come it'll be $50. By the way the weather's going, this will be before any snowfall and before winter tires time!

Hopefully this sparks some interest! Whadya guys think?

What time on the 27th Brian?

Winter Beater Meet anyone????

Who wants to go rally racing today?

Originally Posted by mimalmo

What time on the 27th Brian?

Hey!

The first car will probably go on around 9:00ish...but no set time to be there.

Can anyone reccomend where I can get a killer alignment done?
My toe is out about 1 degree and I have a feeling that the shop isnt adjusting it correctly by loosening the 3 bolts on the upper trailing arm

try jeff the alignment guy, i have to align all my cars in the past