![]() |
![]() |
|
|
||||||
|
Motorsports & Track Forum by BimmerWorld
From Auto-X to Trackday to Racing and Professional Motorsports – this is the place to discuss making BMWs fast Sponsored by BimmerWorld |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
Loose Oil Pump Nut??
I'm going to be tracking my xi a lot. So far 3 days at LRP & another 5 coming up b4 the end of June. I've read some posts about the oil pump nut/bolt coming loose. How often does this really happen? And which part of the oil pump actually loosens? Am I being to nervous about this? Chas
|
|
|
|
|
|
#2 | |
|
58mm of Bliss
|
Quote:
Keep the RPMs below 6k, and you should be OK at LRP....although I would run an extra quart of oil in the pan. Turn 1 is a long drive around under high load..... And the good news is you probably won't catch air going up the hill like many race cars. That's a zinger to the engine and driveline. |
|
|
|
|
|
|
#3 |
|
Registered User
|
Ditto on just shifting at 6k and you'll be fine. Running it up to 7k constantly is what will kill an M54 if you don't have a revamped OPN.
__________________
|
|
|
|
|
|
#4 |
|
Banned User
|
mine came off i shut her down had the nut staked/loctited. you have very little time to save the engine once the nut drops.
|
|
|
|
|
|
#5 |
|
Registered User
|
OK, my bad. I did not do a thorough enough search. Finally found the info I was looking for and whether or not this was just a fairy tale. Thanks for the advice on RPM's but, isn't an extra qt oil the pan a bit much? My dipstick reads full after 8.5 qts. Won't the crank start to cavitate the extra oil in the pan? Chas
|
|
|
|
|
|
#6 |
|
Registered User
|
I don't see how the extra oil helps the situation at hand.
I agree that running an extra 1/2 quart of oil will help keep oil pressure up and thus be good for the rest of the engine, but I don't see how extra oil will keep the OPN from falling off.
__________________
|
|
|
|
|
|
#7 |
|
Registered User
|
|
|
|
|
|
|
#8 |
|
Registered User
|
i think he meant that it would help the potential oil starvation from LRP... around turn 1
__________________
-Azlan *I want to be like CD330*
![]() ![]() |
|
|
|
|
|
#9 | |
|
Registered User
|
Quote:
I was just referring to going with something like a VAC OPN modification, VAIO's 3-point design, or the BMW Motorsport kit. The factory ZHP attachment is much better but not perfect. When I baffled my oil pan, I through on the VAC Competition Oil Pump as some cheap insurance from starvation. My mistake then for misreading
__________________
|
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|