|
|
|
|
||||||
|
Motorsports & Track Forum by BimmerWorld
From Auto-X to Trackday to Racing and Professional Motorsports – this is the place to discuss making BMWs fast Sponsored by BimmerWorld |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-10-2010, 04:47 PM
|
#1 |
|
Registered User
|
Track flywheel and clutch recommendations?
So I am swapping my auto transmission for a 5 speed this summer and will be slowly building my '02 330Ci into a track car over the next few years. I am wanting to run NASA GTS2 and BMWCCA JP. I have been looking into ltw flywheels and upgraded clutch kits and was wondering if you guys have any recommendations? Anything to avoid or anything you have found to work great? Chattering and extra noise does not bother me and is expected with the ltw flywheel. Thanks for the help.
__________________
Last edited by BimmerIII; 05-10-2010 at 04:55 PM. Reason: typo |
|
|
|
05-10-2010, 10:22 PM
|
#2 |
|
Registered User
|
any UUC clutch/flywheel kit should be very solid..maybe segmented kevlar if its gonna be only a track car?
__________________
 |
|
|
|
|
05-11-2010, 03:34 PM
|
#3 |
|
Slow in, slower out
|
In my opinion, the E34 M5 clutch based stuff from UUC is bulletproof.
__________________
Mod the driver first. Participate in your local BMWCCA driving school. Have you joined BMWCCA yet?
My Track Schedule The solution to the lack of headroom in the X6  |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
