* What did you do to/for your E46 today? * - Page 718

j_block · 12-08-2012, 03:17 AM

Quote:

Originally Posted by serdar255

Decided to spend some money on her I've been on a handling spree, what do you guys think front camber plates and a Carbon fiber sunroof insert, or front and rear camber plates, or sunroof insert and gopro3?

Not so sure of the last one.

Buy my camber kit that I have for sale

Sent from my SPH-D700 using Bimmer App

cak323i · 12-08-2012, 02:34 PM

Updated my projects thread...

Zchild · 12-08-2012, 03:17 PM

I finally got around to clearing one of the last remaining set of codes after adding a M54B30 block, injectors and crankshaft to the mix. I had an E3 and E4 which are O2 sensors pre-cat cylinders 1-3 and 4-6. I pulled both old pre-cat sensors and they were scorched beyond recognition. I put in the new sensors cleared the codes and the car woke-up from it's come-like slumber... Only new front and rear bumpers to go and I'll be done for a minute, I think; 337,947 miles and rollin!

mightymouse777 · 12-08-2012, 03:28 PM

Hoping to settle on a deal to get her a friend. 1989 Mercedes 190e. Can't pass up the price lol

Sent from my LG-P930 using Bimmer App

metal massager · 12-08-2012, 03:29 PM

Did the rear brakes and did oil change. Boring right?.....well I also installed a Stahlbus oil drain plug that never needs to be removed again!!!! Super cool system!!!

http://www.stahlbus.com/info/en/prod...l-drain-valves

To change oil, just take off the cap by hand. No oil comes out until the hose is plugged into the main unit, then the 1foot hose section is run into your bucket with no mess. This is the coolest thing!!! I literally haven't changed my own oil in 15 years, now I don't even need tools to do it.

using Bimmer App

WDE46 · 12-08-2012, 03:34 PM

Quote:

Originally Posted by metal massager

Did the rear brakes and did oil change. Boring right?.....well I also installed a Stahlbus oil drain plug that never needs to be removed again!!!! Super cool system!!!

http://www.stahlbus.com/info/en/prod...l-drain-valves

To change oil, just take off the cap by hand. No oil comes out until the hose is plugged into the main unit, then the 1foot hose section is run into your bucket with no mess. This is the coolest thing!!! I literally haven't changed my own oil in 15 years, now I don't even need tools to do it.

using Bimmer App

filter housing socket

metal massager · 12-08-2012, 03:47 PM

I said to change the OIL I need no tools. Changing the filter is different...dangit, stupid oil filter cap.....ok, I need one tool. Haha

Sent from my PC36100 using Bimmer App

RKiepper · 12-08-2012, 05:03 PM

Quote:

Originally Posted by metal massager

I said to change the OIL I need no tools. Changing the filter is different...dangit, stupid oil filter cap.....ok, I need one tool. Haha

Sent from my PC36100 using Bimmer App

They need to make a metal housing cap that the lug wrench can be used on.

The Thomas J · 12-08-2012, 05:42 PM

refilled the winsheild washer cleaner.

metal massager · 12-08-2012, 06:29 PM

Check out that Stahlbus drain plug....everyone should have one! Coolest, simple idea ive seen in a while!

tock172 · 12-08-2012, 06:43 PM

Found this awesome video about Bilstein dampers:

///MPR77 · 12-08-2012, 07:10 PM

Quote:

Originally Posted by tock172

Found this awesome video about Bilstein dampers:

Great video!

Timeless information...

Oakley Razor blades at 2:24 not so timeless.

Sent from my SAMSUNG-SGH-I727 using Bimmer App

Snik · 12-08-2012, 08:41 PM

Laid dynamat in the trunk to reduce the exhaust volume in the cabin a lil bit.
Seems to have worked.

Solidjake · 12-08-2012, 08:43 PM

Haven't done anything to the car in about two weeks besides gas and a car wash.

RKiepper · 12-08-2012, 09:41 PM

Just changed the mother****ing tire that the shop supposedly fixed. This is the fourth time now... Two different shops.

Nico16 · 12-09-2012, 12:10 AM

11 year old drifter

illestminimike · 12-09-2012, 01:25 AM

Drove it like an M car. Felt good.

sparky1969 · 12-09-2012, 10:07 AM

Going for a rainy drive today

E46tknv · 12-09-2012, 10:48 AM

Fixed a couple of engine codes due to carelessness of mechanic. Took about 15min of googling and finding out 1 connector is not plugged in, and one connector is plugged in the wrong place

Wanted to give it a nice bath but rain screwed the day up.

NFSx328ci · 12-09-2012, 11:53 AM

Replaced the power steering pump and reservoir and Exhaust camshaft sensor

12-08-2012, 02:34 PM	#14342
cak323i Registered User Join Date: Nov 2006 Location: RI Posts: 2,537 My Ride: ///M3 & 330i ZHP View My Garage	Updated my projects thread... __________________ 2004 TiAg ///M3 2003 Imola Red 330i ZHP 1999 *Electric Red 323i* - *SOLD* ZHP Project Thread TiAg ///M Project Thread

12-08-2012, 03:17 PM	#14343
Zchild Registered User Join Date: Mar 2006 Location: Columbia, Maryland Posts: 1,640 My Ride: 2000 BMW 3XXi ZSP View My Garage	I finally got around to clearing one of the last remaining set of codes after adding a M54B30 block, injectors and crankshaft to the mix. I had an E3 and E4 which are O2 sensors pre-cat cylinders 1-3 and 4-6. I pulled both old pre-cat sensors and they were scorched beyond recognition. I put in the new sensors cleared the codes and the car woke-up from it's come-like slumber... Only new front and rear bumpers to go and I'll be done for a minute, I think; 337,947 miles and rollin! __________________ V/R Zachary Pullins Sr. National Capital Chapter BMWCCA NCC Member Recognition Chairman NCC High Performance Driving School Registrar NCC Auto-X BOD Liaison DIY Senior Committee Coordinator 2006 E90 325Xi & 2000 E46 3XXi " Vision without resources is just hallucination" Last edited by Zchild; 12-08-2012 at 03:19 PM.

12-08-2012, 03:29 PM	#14345
metal massager Registered User Join Date: Jan 2012 Location: menifee, ca Posts: 121 My Ride: frankenbi///Mmer View My Garage	Did the rear brakes and did oil change. Boring right?.....well I also installed a Stahlbus oil drain plug that never needs to be removed again!!!! Super cool system!!! http://www.stahlbus.com/info/en/prod...l-drain-valves To change oil, just take off the cap by hand. No oil comes out until the hose is plugged into the main unit, then the 1foot hose section is run into your bucket with no mess. This is the coolest thing!!! I literally haven't changed my own oil in 15 years, now I don't even need tools to do it. using Bimmer App __________________

12-08-2012, 03:47 PM	#14347
metal massager Registered User Join Date: Jan 2012 Location: menifee, ca Posts: 121 My Ride: frankenbi///Mmer View My Garage	I said to change the OIL I need no tools. Changing the filter is different...dangit, stupid oil filter cap.....ok, I need one tool. Haha Sent from my PC36100 using Bimmer App __________________

12-08-2012, 06:43 PM	#14351
tock172 100% star stuff Join Date: Jan 2011 Location: San Diego Posts: 2,452 My Ride: 2004 330i View My Garage	Found this awesome video about Bilstein dampers: __________________ Bilstein/Eibach B12 Pro-Plus Suspension System \| DICE Mediabridge \| Valentine One

12-08-2012, 03:28 PM	#14344
mightymouse777 Registered User Join Date: Jul 2012 Location: Norman OK Posts: 67 My Ride: 01 325Ci View My Garage	Hoping to settle on a deal to get her a friend. 1989 Mercedes 190e. Can't pass up the price lol Sent from my LG-P930 using Bimmer App

12-08-2012, 05:42 PM	#14349
The Thomas J Registered User Join Date: May 2010 Location: Staten Island, NY Posts: 418 My Ride: 2002 325Cic View My Garage	refilled the winsheild washer cleaner.

12-08-2012, 06:29 PM	#14350
metal massager Registered User Join Date: Jan 2012 Location: menifee, ca Posts: 121 My Ride: frankenbi///Mmer View My Garage	Check out that Stahlbus drain plug....everyone should have one! Coolest, simple idea ive seen in a while!

12-08-2012, 08:43 PM	#14354
Solidjake Mod Join Date: May 2008 Location: NYC Posts: 19,926 My Ride: 2002 330i View My Garage	Haven't done anything to the car in about two weeks besides gas and a car wash. __________________ Follow my cross country drive to Bimmerfest West 2013 http://forum.e46fanatics.com/showthread.php?t=987217 Youtube - Electric Fan Swap/Aux Fan Removal - Projector Retrofit - E46 Bulb Guide

12-08-2012, 09:41 PM	#14355
RKiepper Registered User Join Date: Feb 2011 Location: Linn, Missouri Posts: 1,546 My Ride: 1999 E46 328I x2 View My Garage	Just changed the mother****ing tire that the shop supposedly fixed. This is the fourth time now... Two different shops.

12-09-2012, 12:10 AM	#14356
Nico16 Registered User Join Date: Oct 2012 Location: Williamsburg Virginia Posts: 114 My Ride: 2000 323i View My Garage	11 year old drifter

12-09-2012, 01:25 AM	#14357
illestminimike Registered User Join Date: Jan 2012 Location: West Covina CA Posts: 3,925 My Ride: 2003 SMG Vert M3 View My Garage	Drove it like an M car. Felt good. __________________ -2003 M3 Vert -1967 Mini Cooper

12-09-2012, 10:07 AM	#14358
sparky1969 Registered User Join Date: Oct 2012 Location: woodstock. ga Posts: 35 My Ride: 330i m3 View My Garage	Going for a rainy drive today

12-09-2012, 10:48 AM	#14359
E46tknv Registered User Join Date: Feb 2011 Location: New york Posts: 5,041 My Ride: Fst'r then your e46 View My Garage	Fixed a couple of engine codes due to carelessness of mechanic. Took about 15min of googling and finding out 1 connector is not plugged in, and one connector is plugged in the wrong place Wanted to give it a nice bath but rain screwed the day up. __________________ .:Eugene:. I used to be an e46 owner. I love this one more. Have headers? Cant pass inspection? Need custom stickers made? or need your wheels brought back to life?

12-09-2012, 11:53 AM	#14360
NFSx328ci Registered User Join Date: Oct 2008 Location: Pawcatuck, CT. Posts: 447 My Ride: TiAg E46 View My Garage	Replaced the power steering pump and reservoir and Exhaust camshaft sensor __________________ My babies; Supercharged 328ci, 99 GSX boosted to 625awhp and 2011 Grand Cherokee. Newest addition: 2009 Alpine White 135i

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread: