E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > Driveline, Engine & DME Tuning

Driveline, Engine & DME Tuning
Talk about driveline improvements, NA tuning and DME tuning your E46 BMW here. This includes diffs, intakes, exhausts, chips, software and OBD tuning.

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 01-04-2011, 11:39 AM   #301
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
Quote:
Originally Posted by aggieE46 View Post
Anthony is in touch with ATI today.

Please post 4 or 5 ribs ASAP!!!
X2 can't place order without it

Anthony@BimmerBrakes

BTW: Will find out the cost of the ATI tool aswell.
BimmerBrakes is offline   Reply With Quote
Old 01-04-2011, 11:40 AM   #302
Rob43
OEM ///Member
 
Rob43's Avatar
 
Join Date: Oct 2009
Location: Richmond VA
Posts: 3,418
My Ride: 2003 BMW 331Ci, 5spd
Just looked,..............5 Rib.
__________________



Rob #43 ITS/ITR/STU, BMW 325I, STU LAP RECORD
SUMMIT POINT WV 1:24:229 S.C.C.A.
(DynoDynamics http://www.vimeo.com/8486878 Dyno Video)
"Chance Favors The Prepared Mind" M54 CAMS 264/252 $849
Quote:
Originally Posted by RacerX View Post
Nitrous is a little trickier than boost, but it's not the spray that kills motors, it's STUPIDITY!!
Rob43 is offline   Reply With Quote
Old 01-04-2011, 01:13 PM   #303
HighBoostin330
Registered User
 
Join Date: May 2003
Location: Bay Area, CA
Posts: 5,259
My Ride: 2002 Stock 330Ci
I posted it on the Paypal comments, but here it is again.

1. aggieE46 (Payment 1 of 2 Sent) 4 Ribbon*
2. bluejeansonfire (Payment 1 of 2 Sent)
3. HighBoostin330 (Payment 1 of 2 Sent) 5 Rib AC Pulley*
4. Zerosum (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
5. TrippinBimmer (Payment 1 of 2 Sent) 4 Ribbon*
6. brendan_select (Maybe Tomorrow or Jan.11)
7. bigjae1976 (Payment 1 of 2 Sent) 1.2590" ATI Adapter Tool*
8. PEI330Ci (Payment 1 of 2 Sent) 1.2585"
9. AL330CI (Payment 1 of 2 Sent) ATI Adapter Tool*
10. Rob43 (Pending) 5 Ribbon*
HighBoostin330 is offline   Reply With Quote
Old 01-04-2011, 01:23 PM   #304
aggieE46
Keep it clean
 
aggieE46's Avatar
 
Join Date: Aug 2006
Location: Royse City
Posts: 8,038
My Ride: 03 Evo, 07 Passat
Send a message via AIM to aggieE46
1. aggieE46 (Payment 1 of 2 Sent) 4 Ribbon*
2. bluejeansonfire (Payment 1 of 2 Sent) 5 Rib AC Pulley
3. HighBoostin330 (Payment 1 of 2 Sent) 5 Rib AC Pulley*
4. Zerosum (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
5. TrippinBimmer (Payment 1 of 2 Sent) 4 Ribbon*
6. brendan_select (Maybe Tomorrow or Jan.11)
7. bigjae1976 (Payment 1 of 2 Sent) 1.2590" ATI Adapter Tool*
8. PEI330Ci (Payment 1 of 2 Sent) 1.2585"
9. AL330CI (Payment 1 of 2 Sent) ATI Adapter Tool*
10. Rob43 (Pending) 5 Ribbon*
__________________
aggieE46 is offline   Reply With Quote
Old 01-04-2011, 02:06 PM   #305
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
*Update*

1. aggieE46 (Payment 1 of 2 Sent) 4 Ribbon*
2. bluejeansonfire (Payment 1 of 2 Sent) 5 Ribbon*
3. HighBoostin330 (Payment 1 of 2 Sent) 5 Ribbon*
4. Zerosum (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
5. TrippinBimmer (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
6. brendan_select (Maybe Tomorrow or Jan.11) 5 Ribbon*
7. bigjae1976 (Payment 1 of 2 Sent) 1.2590" 4 Ribbon Plus ATI Adapter Tool*
8. PEI330Ci (Payment 1 of 2 Sent) 1.2585" 5 Ribbon*
9. AL330CI (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
10. Rob43 (Pending) 5 Ribbon*

HighBoost - I had your info. Forgot to add on list

-Anthony@BimmerBrakes

Last edited by BimmerBrakes; 01-06-2011 at 08:41 PM.
BimmerBrakes is offline   Reply With Quote
Old 01-04-2011, 08:10 PM   #306
PEI330Ci
58mm of Bliss
 
PEI330Ci's Avatar
 
Join Date: Jul 2003
Location: PEI,Canada
Posts: 3,969
My Ride: 330i, 330Ci
5 ribbon for me
PEI330Ci is offline   Reply With Quote
Old 01-05-2011, 02:30 AM   #307
AL330CI
Registered User
 
Join Date: Apr 2007
Location: NorCal
Posts: 339
My Ride: 330Ci
4 ribs on my AC pulley belt
AL330CI is offline   Reply With Quote
Old 01-05-2011, 09:34 AM   #308
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
WOOT! Now Waiting on Brendan. Just email ATI with info and waiting on a Call back to Place Order

-Anthony@BimmerBrakes
BimmerBrakes is offline   Reply With Quote
Old 01-05-2011, 01:50 PM   #309
aggieE46
Keep it clean
 
aggieE46's Avatar
 
Join Date: Aug 2006
Location: Royse City
Posts: 8,038
My Ride: 03 Evo, 07 Passat
Send a message via AIM to aggieE46
Sweet!
__________________
aggieE46 is offline   Reply With Quote
Old 01-06-2011, 08:42 PM   #310
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
*Update*

1. aggieE46 (Payment 1 of 2 Sent) 4 Ribbon*
2. bluejeansonfire (Payment 1 of 2 Sent) 5 Ribbon*
3. HighBoostin330 (Payment 1 of 2 Sent) 5 Ribbon*
4. Zerosum (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
5. TrippinBimmer (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
6. brendan_select (Payment 1 of 2 Sent) 5 Ribbon*
7. bigjae1976 (Payment 1 of 2 Sent) 1.2590" 4 Ribbon Plus ATI Adapter Tool*
8. PEI330Ci (Payment 1 of 2 Sent) 1.2585" 5 Ribbon*
9. AL330CI (Payment 1 of 2 Sent) 4 Ribbon Plus ATI Adapter Tool*
10. Rob43 (Payment 1 of 2 Sent) 5 Ribbon*

Now waiting on Ricky to get back with me to place order

-Anthony@BimmerBrakes

Last edited by BimmerBrakes; 01-13-2011 at 01:25 AM.
BimmerBrakes is offline   Reply With Quote
Old 01-07-2011, 10:51 AM   #311
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
Just got an email from Ricky.

"The puller/installer P/N 918999 I can do at $143.70. Also we have made custom installation studs to use with our puller/installer for the M54B30 motor. They are $50."

-Anthony@BimmerBrakes
BimmerBrakes is offline   Reply With Quote
Old 01-07-2011, 11:09 AM   #312
TxZHP04
Registered User
 
Join Date: Feb 2006
Location: DFW
Posts: 5,728
My Ride: ESS TS2+ ZHP
Quote:
Originally Posted by Anthony@BimmerBrakes View Post
Just got an email from Ricky.

"The puller/installer P/N 918999 I can do at $143.70. Also we have made custom installation studs to use with our puller/installer for the M54B30 motor. They are $50."

-Anthony@BimmerBrakes
Is the $50 "custom installation stud" compatible with other generic puller/installer tools or is P/N 918999 required for the installation?
__________________
04 IR 330i ZHP | ESS TS2+ SC | MagnaFlow "headers" | KMS 3.64 LSD | AST 4100 550/650| APEX ARC-8 18x9 | H&R front sway bar | Vorshlag camber plates, RTAB limiters | TMS subframe & swaybar reinforcements | UUC SSK & DSSR | UUC TM & TME | BW motor mounts | Dinan strut & shock tower bars | vaio 4-bolt oil pump
TxZHP04 is offline   Reply With Quote
Old 01-07-2011, 01:49 PM   #313
HighBoostin330
Registered User
 
Join Date: May 2003
Location: Bay Area, CA
Posts: 5,259
My Ride: 2002 Stock 330Ci
Quote:
Originally Posted by Anthony@BimmerBrakes View Post
Just got an email from Ricky.

"The puller/installer P/N 918999 I can do at $143.70. Also we have made custom installation studs to use with our puller/installer for the M54B30 motor. They are $50."

-Anthony@BimmerBrakes
I'm missing this, but what does the custom installation studs do? Maybe pictures of each part would be nice.
HighBoostin330 is offline   Reply With Quote
Old 01-07-2011, 01:57 PM   #314
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
Quote:
Originally Posted by TxZHP04 View Post
Is the $50 "custom installation stud" compatible with other generic puller/installer tools or is P/N 918999 required for the installation?
If the other puller/installers accept 1/2 - 20 than yes.

Anthony@BimmerBrakes
BimmerBrakes is offline   Reply With Quote
Old 01-11-2011, 03:44 AM   #315
brendan_select
Registered User
 
Join Date: Jun 2009
Location: Melbourne
Posts: 228
My Ride: E46 330
brendan_select has paid 1st payment and has specified 5 rib (yet to specify my SNOUT) - thanks for everyones support on the GB and props to Anthony! Cheers from Down Under - Brendan

P.S I will be keen to order the tools.
"The puller/installer P/N 918999 I can do at $143.70. Also we have made custom installation studs to use with our puller/installer for the M54B30 motor. They are $50."
Does this mean total of $193.70 for all tools required to install the ATI? Or will other tools still be required in addition to these?

Noted some of the people buying the tools are prepared to "rent" then to others one they have done their own installs.
Being from Australia I need to weight up cost of rental and post + return post (and inconvenience) versus just buying the tools outright....
brendan_select is offline   Reply With Quote
Old 01-11-2011, 09:11 PM   #316
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
The GB is Officially Closed. Order has been Placed

-Anthony@BimmerBrakes
BimmerBrakes is offline   Reply With Quote
Old 01-11-2011, 10:37 PM   #317
bigjae1976
Registered User
 
bigjae1976's Avatar
 
Join Date: Dec 2003
Location: Earth
Posts: 11,469
My Ride: A car
Send a message via MSN to bigjae1976
Quote:
Originally Posted by Anthony@BimmerBrakes View Post
The GB is Officially Closed. Order has been Placed

-Anthony@BimmerBrakes
...and hell will freeze over tomorrow.
bigjae1976 is offline   Reply With Quote
Old 01-12-2011, 10:02 AM   #318
aggieE46
Keep it clean
 
aggieE46's Avatar
 
Join Date: Aug 2006
Location: Royse City
Posts: 8,038
My Ride: 03 Evo, 07 Passat
Send a message via AIM to aggieE46
You never know! The weather HAS been crazy!

Quote:
Originally Posted by bigjae1976 View Post
...and hell will freeze over tomorrow.
__________________
aggieE46 is offline   Reply With Quote
Old 01-19-2011, 05:45 PM   #319
BimmerBrakes
The Brake Newbie!
 
Join Date: Feb 2010
Location: DFW, Tx
Posts: 1,146
My Ride: 2005 ZHP BMW
Send a message via AIM to BimmerBrakes
The Waiting Games Begin

I can Start Collecting Part 2 payment now. So, that when ATI is ready for the Second Payment I can send it to them ASAP!

-Anthony@BimmerBrakes
BimmerBrakes is offline   Reply With Quote
Old 01-20-2011, 10:13 AM   #320
bigjae1976
Registered User
 
bigjae1976's Avatar
 
Join Date: Dec 2003
Location: Earth
Posts: 11,469
My Ride: A car
Send a message via MSN to bigjae1976
Any chance of getting a rough estimate of when they will ship? If this is going to take a month or two then I'd rather do a local pickup from you when I return to the US.
bigjae1976 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Censor is OFF





All times are GMT -5. The time now is 04:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use