|
|
|
|
||||||
|
///M3 Forum
The BMW E46 ///M3 is the M version E46 and puts out an amazing 333 HP and 262 lb-ft of torque at stock specs! There are an amazing amount of modifications for both the coupe and convertible models so read up and get started modifying your cars today! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-29-2010, 11:06 AM
|
#1 |
|
Registered User
|
Rear View Mirror
If I don't need to remove the whole mirror, but just need to take the front plate off (the part with the mirror on it), does it just pop off? My V1 is mounted inside the mirror casing, but whatever adhesive kept the plate pressed against the mirror has come off and now I can't tell if the signals are in front or behind me. If you need a picture to see what I'm talking about, just ask. Thanks.
|
|
|
|
11-07-2010, 02:03 AM
|
#2 |
|
Registered User
|
Taking the whole mirror off to work on it would probably be easier anyway.
__________________
 |
|
|
|
|
10-02-2012, 09:42 AM
|
#3 |
|
Senior Eurowerkz Member
|
where do a go to buy v1 display in rear view mirror
my stock mirror is shot so a figue to upgrade to the display v1 in the rear view mirror
bob 
__________________
 |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
