Dynavin Info: Look here first...Part 2..."Version 5"

hi guys just installed my d90 into my car.
my only gripe is my 60gb ipod gen 5 video dont auto resume.
everytime i turn ignition on i have to select album/song.
is there an easy fix for this please?
thanks colin

hello
my Dynavin MC 2000 is release ZH 2011-03-09
there is there a more recent update??

Looking for an installer or guidelines on how to select an installer for a Dynavin D99 in an e39 M5 with DSP. Any suggestions on an installer or how to select one?

wheres the green reverse wire on the dynavin go?
so that the camera auto sences

Anyone in the NJ area that can help me with the Android unit?

My V5 unit crashed.I have blank screen on every mode and white screen on NAV mode, no sound nothing....Someone told me I need to reinstall the ROM but it's nowhere to be found.All I could find was for android version

No, you are way off track.....that unit is broken....no rom to fix that. Best case scenario the ribbon cable/plug going to screen might be loose or damaged.

You can find it In the dynavin forums. Look on google for dynavin free forums and it'll take you to those where you can download the most up to date one. I think it was from 3.2012 if I'm not mistaken.


But Jeff knows what he's talking about.

Actually is not fully blank.On AUX mode I get afully readable "Caution do not use while driving sign" and all the modes in the left upper corner are appearing when you change them.And if it's broken who repair those?

but you are not getting a radio screen or cd/dvd screen? And the nav screen is white? If so then my previous post stands, the signals are not reaching the screen because the cable is damaged, one of the plugs is loose, or the main board is dead. Some of those possible causes are more fixable than others.....

I see.Thanks for the help!

Overall I'm much happier with this unit over stock but it has issues and I'm quite certain they are all software related. It would be really nice if they came out with a software update that we could run on the D99 units... even if its at a cost. I get the infamous POP sound when Bluetooth switches back to Radio (scared the crap out of me, jerked the car the first few times). The USB doesn't work properly on my Android Razr Maxx HD, it rapidly blinks "USB connection detected" at the top of my phone and I am unable to do anything with it. End of apple cable from unit is cheap, my casing around the apple cable broke apart, now I have exposed wires and no "lock".

I looked on your website and I see:
iGo Primo Navigation Program

The screen shots are completely differ than my current Navi system on the D99. Did they update the software?

Enhancement requests:
Streaming Bluetooth audio (new unit)
XM Radio and Traffic Updating (new unit)
Software update for D99 unit.
Better phone interface (software update)
Eliminate POPing noise between screen transitions (most likely software update)
Enable audio to be played while in Reverse (or at least an option to enable/disable). (software update)
Better quality cables (New unit)
Better Navigation program. It takes some horrible routes and there is really no way to change them (software update)

So I bought a V5 Win CE unit less than two years ago, now it appears that it stopped working and I see only disturbance on the screen at all modes and white screen on NAVI, no sound nothing...Just wondering does dynavin or someone repairs those or can I get a new motherboard for my unit since I spent over $850 for it and I drive my M3 only on weekends.Or maybe I should get a new one for another $850

is there any way to access the secret factory menu without the remote? or be able to see the firmware version from a different screen?

Factory menu is only (correct me if I'm wrong, Jeff) on the D99 units and up although I never had a D95 to test it. You do that without the remote by going to the settings, and on the system tab (not sound, or display), tapping on the top right.