The Official: "Post Your [AGGRESSIVE SQUARE WHEEL SETUP] Thread" - Page 52

MR_Se7en · 09-24-2012, 10:13 AM

damn.

supertimm · 10-03-2012, 10:51 PM

17x9 +15 Front || 17x9 +5 Rear

Davedoesskids · 10-04-2012, 10:03 AM

Gents I have read this thread from start to finish in about a week!! lol each night I keep going... New to the scene only been in a E46 for a week! It's a 325i face lifted sedan... I plan on doing mods to suspension and guards as I love the stanced / poked look. But I am also on a budget so will need to go in steps. First step is buying wheels. I have my heart set on a set of VMR's from about 20 pages back or so... 19 x 9.5 http://www.velocitymotoring.com/wheels_v713.html which offset should I go to get that aggressive look but not be stupid to drive? Yes I plan on running a small stretched wheel and yes I will slam it... all in due time. For now as its my daily without coilovers and camber plates ect will a 33 offset be about right? I would prefer not to run spacers as I have the option to buy new rims and choise what I want!? I have read the whole thread and seen plenty of cars with this exact sizing but unknown if I cna get away with it, without any other mods? Any info would be great! I've loved every minute spent in this thread!

Cheers Dave

domcreates · 10-04-2012, 03:32 PM

Quote:

Originally Posted by Davedoesskids

Gents I have read this thread from start to finish in about a week!! lol each night I keep going... New to the scene only been in a E46 for a week! It's a 325i face lifted sedan... I plan on doing mods to suspension and guards as I love the stanced / poked look. But I am also on a budget so will need to go in steps. First step is buying wheels. I have my heart set on a set of VMR's from about 20 pages back or so... 19 x 9.5 http://www.velocitymotoring.com/wheels_v713.html which offset should I go to get that aggressive look but not be stupid to drive? Yes I plan on running a small stretched wheel and yes I will slam it... all in due time. For now as its my daily without coilovers and camber plates ect will a 33 offset be about right? I would prefer not to run spacers as I have the option to buy new rims and choise what I want!? I have read the whole thread and seen plenty of cars with this exact sizing but unknown if I cna get away with it, without any other mods? Any info would be great! I've loved every minute spent in this thread!

Cheers Dave

I could be wrong but I don't think you'll be able to slam it on 19's and still have poke.

You have to tuck 19's in order to slam it. So you should go for 19x8.5's I think.

If you want poke then you're better off with a smaller size wheel like a 17 or 18.

But I could be wrong

Evap · 10-04-2012, 05:16 PM

Quote:

Originally Posted by whoooty

I could be wrong but I don't think you'll be able to slam it on 19's and still have poke.

You have to tuck 19's in order to slam it. So you should go for 19x8.5's I think.

If you want poke then you're better off with a smaller size wheel like a 17 or 18.

But I could be wrong

Don't try to poke 18s out back if you want to be actually slammed. Lol. Trust me on this one. I was tucking rear rim on 18s and still wasn't low enough.

BimmerApp wut

Press22 · 10-04-2012, 05:18 PM

Starting to hate my 225/40/18 tires. so much rubbing

I want 17x9s

Davedoesskids · 10-07-2012, 09:28 AM

hmm well I ordered 19s so it looks like I will be getting some coilovers too.. I hear a lot about camber plates.. Can someone explain to a noob how you to get aggresive camber? like what exactly is changed? I understand coilovers and how they work. Does anyone have any pics of their wheels off, just of their suspension setup with Camber mods? Just keen to see it - then I will know how it works!

mcr_driver · 10-16-2012, 01:17 AM

Quote:

Originally Posted by Davedoesskids

hmm well I ordered 19s so it looks like I will be getting some coilovers too.. I hear a lot about camber plates.. Can someone explain to a noob how you to get aggresive camber? like what exactly is changed? I understand coilovers and how they work. Does anyone have any pics of their wheels off, just of their suspension setup with Camber mods? Just keen to see it - then I will know how it works!

Please go and google or youtube this information, thanks. It's readily available all over the internet, not just here.

DINxiAN · 10-23-2012, 01:33 PM

Ill be purchasing a set of Apex Arc-8's very soon (18x9.5 +35) Fairly excited

nckash055 · 10-29-2012, 03:24 PM

got featured on a buddy of mines page let me know what you guys think ..hate all you want

http://beastcoast.us/2012/10/15/kash...ank/#more-1369

Stenbakken · 10-31-2012, 06:45 AM

Wrong post

NightRaider93 · 10-31-2012, 10:00 AM

Those aren't square wheels, they are staggered.

Sent from my SGH-I777 using Bimmer App

btober · 11-01-2012, 12:45 PM

i havnt been on e46 fanatics in so long time to come back

btober · 11-01-2012, 12:48 PM

this is my setup so far i need to lower the back more.but hard bc i have no where too living in flroida alone but i will sooon!

Alanz0 · 11-02-2012, 09:02 AM

What suspension you on?^^

btober · 11-02-2012, 10:46 AM

rokkors and its a real hassle to turn the back

E46_330i_Stud · 11-02-2012, 03:26 PM

Quote:

Originally Posted by btober

this is my setup so far i need to lower the back more.but hard bc i have no where too living in flroida alone but i will sooon!

Is this even square? Needs to be lower, less tire, Moar poke

btober · 11-04-2012, 08:18 PM

its prety round haha

Barbaros · 11-10-2012, 09:49 PM

Just teasing for now. Funny because they are all the way down but the fronts are still so f ing high! I need to take the helper springs out. Ordering some camber arms and camber plates to go a little lower.

09-24-2012, 10:13 AM	#1022
MR_Se7en Registered User Join Date: Sep 2012 Location: Atx Posts: 6 My Ride: 323i View My Garage	damn. __________________ because RACECAR!

10-04-2012, 10:03 AM	#1024
Davedoesskids Registered User Join Date: Sep 2012 Location: Perth, Australia Posts: 18 My Ride: E46 325i View My Garage	Gents I have read this thread from start to finish in about a week!! lol each night I keep going... New to the scene only been in a E46 for a week! It's a 325i face lifted sedan... I plan on doing mods to suspension and guards as I love the stanced / poked look. But I am also on a budget so will need to go in steps. First step is buying wheels. I have my heart set on a set of VMR's from about 20 pages back or so... 19 x 9.5 http://www.velocitymotoring.com/wheels_v713.html which offset should I go to get that aggressive look but not be stupid to drive? Yes I plan on running a small stretched wheel and yes I will slam it... all in due time. For now as its my daily without coilovers and camber plates ect will a 33 offset be about right? I would prefer not to run spacers as I have the option to buy new rims and choise what I want!? I have read the whole thread and seen plenty of cars with this exact sizing but unknown if I cna get away with it, without any other mods? Any info would be great! I've loved every minute spent in this thread! Cheers Dave Last edited by Davedoesskids; 10-04-2012 at 10:33 AM.

10-04-2012, 05:18 PM	#1027
Press22 Registered User Join Date: Mar 2012 Location: Las Vegas Posts: 305 My Ride: 01 325ci View My Garage	Starting to hate my 225/40/18 tires. so much rubbing I want 17x9s __________________ EUROSQUAD My Build Thread Last edited by Press22; 10-04-2012 at 05:19 PM.

10-23-2012, 01:33 PM	#1030
DINxiAN Registered User Join Date: Jun 2010 Location: Twin Cities Posts: 17 My Ride: Is black View My Garage	Ill be purchasing a set of Apex Arc-8's very soon (18x9.5 +35) Fairly excited __________________

10-31-2012, 06:45 AM	#1032
Stenbakken Registered User Join Date: Jun 2012 Location: Norway Posts: 12 My Ride: BMW E46 View My Garage	Wrong post Last edited by Stenbakken; 10-31-2012 at 10:15 AM.

09-23-2012, 09:26 PM	#1021
dano17 Registered User Join Date: Dec 2011 Location: Mohrsville Posts: 150 My Ride: 2000 328i View My Garage

10-03-2012, 10:51 PM	#1023
supertimm Registered User Join Date: Mar 2012 Location: Vista, CA Posts: 24 My Ride: its not fast View My Garage	17x9 +15 Front \|\| 17x9 +5 Rear

10-07-2012, 09:28 AM	#1028
Davedoesskids Registered User Join Date: Sep 2012 Location: Perth, Australia Posts: 18 My Ride: E46 325i View My Garage	hmm well I ordered 19s so it looks like I will be getting some coilovers too.. I hear a lot about camber plates.. Can someone explain to a noob how you to get aggresive camber? like what exactly is changed? I understand coilovers and how they work. Does anyone have any pics of their wheels off, just of their suspension setup with Camber mods? Just keen to see it - then I will know how it works!

10-29-2012, 03:24 PM	#1031
nckash055 Registered User Join Date: Sep 2012 Location: mass Posts: 29 My Ride: 323i View My Garage	got featured on a buddy of mines page let me know what you guys think ..hate all you want http://beastcoast.us/2012/10/15/kash...ank/#more-1369

10-31-2012, 10:00 AM	#1033
NightRaider93 Waka Waka Waka Join Date: Nov 2010 Location: University of Kentucky Posts: 1,272 My Ride: 04 325i View My Garage	Those aren't square wheels, they are staggered. Sent from my SGH-I777 using Bimmer App __________________ -Spencer

11-01-2012, 12:45 PM	#1034
btober Registered User Join Date: Jun 2010 Location: JerseyShore E46 Posts: 299 My Ride: AW 330i View My Garage	i havnt been on e46 fanatics in so long time to come back __________________ flickr crackfire.tumblr instagram @btober

11-01-2012, 12:48 PM	#1035
btober Registered User Join Date: Jun 2010 Location: JerseyShore E46 Posts: 299 My Ride: AW 330i View My Garage	this is my setup so far i need to lower the back more.but hard bc i have no where too living in flroida alone but i will sooon! __________________ flickr crackfire.tumblr instagram @btober

11-02-2012, 09:02 AM	#1036
Alanz0 Registered User Join Date: Sep 2010 Location: The Burg, PA Posts: 216 My Ride: 325i View My Garage	What suspension you on?^^

11-02-2012, 10:46 AM	#1037
btober Registered User Join Date: Jun 2010 Location: JerseyShore E46 Posts: 299 My Ride: AW 330i View My Garage	rokkors and its a real hassle to turn the back __________________ flickr crackfire.tumblr instagram @btober

11-04-2012, 08:18 PM	#1039
btober Registered User Join Date: Jun 2010 Location: JerseyShore E46 Posts: 299 My Ride: AW 330i View My Garage	its prety round haha __________________ flickr crackfire.tumblr instagram @btober

11-10-2012, 09:49 PM	#1040
Barbaros Registered User Join Date: Jan 2012 Location: Queens, NY Posts: 1,261 My Ride: 328i View My Garage	Just teasing for now. Funny because they are all the way down but the fronts are still so f ing high! I need to take the helper springs out. Ordering some camber arms and camber plates to go a little lower. __________________ My build thread/// http://forums.bimmerforums.com/forum....php?t=1838687

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread: