Engine & Performance
Everything to make your car faster! Air intakes, superchargers, turbos, flywheel & clutch, differentials, chips, short shift kits, exhausts, etc.....
||Thread Tools||Search this Thread||Rate Thread||Display Modes|
|01-19-2011, 12:59 PM||#1|
Join Date: Jan 2011
My Ride: 328
FS: Parting out M52TU / M54, Complete Motor
I'm in the process of parting out a complete M52TU 2.8L / M54 Motor, will ship all parts but pick up is also available here in Chicago.
Following parts are available, most are interchangeable with M54 motors, I believe the manifold is M52TU only and perhaps the wiring harness (Please correct me if I'm wrong
Pictures of most of the parts listed can be found here:
Prices are OBO, feel free to make a reasonable bid and we'll go from there
Complete Head (M52TU and M54 motors, pressure checked and cleaned) Includes Dual Vanos Unit, Gears, Chain, and all tensioners - $800 shipped
M52TU Crankshaft - 180$ shipped
M52TU / M54 Oil Pan - 150$ shipped
Wiring Harness (uncut) - 90$ shipped
Crank Dampner Pulley - 70$ shipped
Oil Filter Housing - 100$ shipped
Complete M52TU Intake Manifold with ICV / DISA / distrubtor rail, hoses, and air seperator - 280$ shipped
Knock Sensors - 30$ shipped
MDK Throttle Body (1439383 A) - 150$ shipped
Timing Chain Cover - 60$ shipped
6x Injectors - 80$ shipped
M52TU / M54 Valve Cover - 120$ shipped
Thank you, please PM me for the fastest response!
Last edited by Boris1; 02-08-2011 at 03:53 PM.
|2.8, 328, m52tu, m54, part out|
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|