///Mostarac's official Build Thread [Updates!] - Page 5

Bart Taylor · 03-18-2011, 11:49 PM

you need some of this

///Mostarac · 03-18-2011, 11:58 PM

thats just too much for me man

Bart Taylor · 03-19-2011, 12:06 AM

we will have to see what happens

FelizPrim3 · 03-19-2011, 12:16 AM

Quote:

Originally Posted by Bart Taylor

you need some of this

winn

///Mostarac · 03-23-2011, 07:38 PM

so today I went to motorcepts again, gave these rims another try. My hopes were pretty high this time.

After some custom fitting...this was the ending result..

WINNNNN!!! my rear finally got liftedd (and no i didnt just raise the coils)
PS it got lower once the springs settled.

I only brought one set of rims to motorcepts to test fit the rear and see if it worked. Turned out it was really busy in motorcepts and they had no time to take off the new rims and put the stockies back on....so this is how i had to drive an hour and a half to get home..

LOL talk about stance

Final result (before the springs set in)

On to the next mods

Updates will come friday hopefully

SalM · 03-23-2011, 07:42 PM

Bart Taylor · 03-23-2011, 07:57 PM

so what was the "custom fitting"?

///Mostarac · 03-23-2011, 08:01 PM

i bought 15mm rear spring pads and they wouldnt fit so we had to cut them so they'd fit properly underneath the spring. no biggie but it helped soooo much

DTMdan · 03-23-2011, 08:12 PM

///Mostarac · 03-23-2011, 08:14 PM

why?

c00gi · 03-23-2011, 08:18 PM

nice!!!! they fit good shi+. nice meeting you today. car is clean

///Mostarac · 03-23-2011, 08:20 PM

Quote:

Originally Posted by c00gi

nice!!!! they fit good shi+. nice meeting you today. car is clean

thanks bro! you too, you needa update your sig!!

DropTopKingM3 · 03-23-2011, 08:22 PM

Good stuff Benny. Glad the fitment nightmare is over for you. Car is coming along nicely bro

DTMdan · 03-23-2011, 08:29 PM

Because this was perfect.
..............V
..............V

///Mostarac · 03-23-2011, 08:37 PM

it looks like that, it just looks a tad bit higher in the back. The picture I took in the shop was literally right after installation, it got a lot lower. i'll post pics when it gets nice out. its currently snowing/lightninging/thundering in jersey

Bart Taylor · 03-23-2011, 10:37 PM

pronounced sidewall markings and unburnt fender paint is for losers

///Mostarac · 03-23-2011, 10:40 PM

Quote:

Originally Posted by DropTopKingM3

Good stuff Benny. Glad the fitment nightmare is over for you. Car is coming along nicely bro

thanks george. hopefully the modding continues!

///Mostarac · 03-26-2011, 12:59 PM

Workin on the front end with nelson (djnekkon)

don't wanna let that secret out just yet

but i took a shot from the rear to show you my ass

///Mostarac · 03-29-2011, 10:10 PM

Im dying to give you guys some updates but im having fitment problems with the front lip to my front bumper. It will be molded soon and i'll post pics ASAP!
hang in there guys!

TrippinBimmer · 03-29-2011, 10:34 PM

Use the BFH Method Works well

03-18-2011, 11:58 PM	#82
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	thats just too much for me man __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-23-2011, 07:38 PM	#85
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	so today I went to motorcepts again, gave these rims another try. My hopes were pretty high this time. After some custom fitting...this was the ending result.. WINNNNN!!! my rear finally got liftedd (and no i didnt just raise the coils) PS it got lower once the springs settled. I only brought one set of rims to motorcepts to test fit the rear and see if it worked. Turned out it was really busy in motorcepts and they had no time to take off the new rims and put the stockies back on....so this is how i had to drive an hour and a half to get home.. LOL talk about stance Final result (before the springs set in) On to the next mods Updates will come friday hopefully __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-23-2011, 07:42 PM	#86
SalM Registered User Join Date: Aug 2009 Location: Long Island,NY Posts: 6,434 My Ride: Shhh View My Garage	__________________ SalMPhotography

03-23-2011, 08:01 PM	#88
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	i bought 15mm rear spring pads and they wouldnt fit so we had to cut them so they'd fit properly underneath the spring. no biggie but it helped soooo much __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-23-2011, 08:12 PM	#89
DTMdan Registered User Join Date: Jan 2010 Location: Mechanicsburg, PA Posts: 3,684 My Ride: E53 X5 3.0i Sport View My Garage	__________________

03-23-2011, 08:14 PM	#90
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	why? __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-23-2011, 08:18 PM	#91
c00gi Registered User Join Date: May 2008 Location: BX, NY Posts: 539 My Ride: 330 COUPIE! View My Garage	nice!!!! they fit good shi+. nice meeting you today. car is clean __________________ DINAN COLD AIR INTAKE, THROTTLE BODY, FREE FLOW EXHAUST, STAGE 3 SOFTWARE, STRUT BAR, ZHP FRONT/REAR BUMPER, M3 MIRRORS, ZHP RIMS, BLACKED OUT TAILS AND TURN SIGNALS, 545 SSK, 35% TINTS, V2 ANGEL EYES, 8K HEADLIGHTS/FOGS ...... and an empty wallet

03-23-2011, 08:22 PM	#93
DropTopKingM3 Registered User Join Date: Sep 2003 Location: New York Posts: 8,368 My Ride: All German View My Garage	Good stuff Benny. Glad the fitment nightmare is over for you. Car is coming along nicely bro __________________ ..George.. ..Is now Alpine White/Cinnamon... ^Don't say my car is topless, say the t!tties is out^

03-23-2011, 08:29 PM	#94
DTMdan Registered User Join Date: Jan 2010 Location: Mechanicsburg, PA Posts: 3,684 My Ride: E53 X5 3.0i Sport View My Garage	Because this was perfect. ..............V ..............V __________________

03-23-2011, 08:37 PM	#95
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	it looks like that, it just looks a tad bit higher in the back. The picture I took in the shop was literally right after installation, it got a lot lower. i'll post pics when it gets nice out. its currently snowing/lightninging/thundering in jersey __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-26-2011, 12:59 PM	#98
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	Workin on the front end with nelson (djnekkon) don't wanna let that secret out just yet but i took a shot from the rear to show you my ass __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-29-2011, 10:10 PM	#99
///Mostarac Registered User Join Date: Jun 2010 Location: Bosnia-Hercegovina, New Jersey Posts: 4,785 My Ride: Sienna Red E46 View My Garage	Im dying to give you guys some updates but im having fitment problems with the front lip to my front bumper. It will be molded soon and i'll post pics ASAP! hang in there guys! __________________ ///Mostarac's Official Build Thread Eurowerkz \| East Coast -Benny

03-29-2011, 10:34 PM	#100
TrippinBimmer Registered User Join Date: Jan 2008 Location: Ridgeland, MS Posts: 5,338 My Ride: ZHP Custom Stage 3.5 View My Garage	Use the BFH Method Works well __________________ ..::\|TrippinBimmer's Boost Build with Cool Parts\|::.. 4whp/3tq SAE Corrected \| Active Autowerke \| BimmerBrakes \| VMR Wheels \| ..::\| TrippinBimmer's New Project : 1988 e30 325e \|::..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: