E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > DIY: Do It Yourself

DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need!

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 10-26-2014, 09:40 PM   #1
psuryava81
Registered User
 
Join Date: Sep 2014
Location: Burlington Mass
Posts: 28
My Ride: 2005 325xi
**E46 DYI: How to make Cigarette Charger turn ON/OFF with ACC**

Hi All,
I have got several useful tips and tricks from this forum. But for the Cigarette Charger always on issue I was not able to find any got fix. The one's I found were very dangerous hack-job driving both the cigarette charger and radio off of the 5Amp fuse. I set out to find a better solution without spending too much. Below is the solution I came up with. This solution maintains the two separate circuits for Radio and charger with their respective fuses.

Diclamer: I do not take any responsibility if you screw up and anything on your car is damaged. This tutorial merely documents the steps I followed to get the fix working on my 2005 E46. If your car is any other year I strongly recommend verifying the fuse board layout is similar to 2005 E46 before you proceed.


Things you will need.

1. Add a Circuit ATC Fuse-TAP

2. A donor fuse to to extract a spade connector
3. Digital Multimeter

Steps.
1. Remove the 5Amp fuse from position 7. Start the car and verify the Radio does not turn ON. Keep the Fuse Aside. Refer to the Fuse placement chart under the fuse board if the Radio turns on after you start the car.
2. Now remove the 20Amp fuse from position 47. Verify the cigarette charger does not work anymore. Keep this aside.
Refer to the Fuse placement chart under the fuse board if the cigarette charger still works.




3. Now place the 5Amp fuse in the bottom row of the fuse tap and the 20Amp fuse on the top row of the fuse tap. See pic below.


4. Now break the donor fuse to yield a connector as shown below


5. Trim the non spade end of the connector so that it can be inserted on the wire end of the fuse tap.Make sure it is set in firmly.

6. Using a set of pliers crimp the wire end to make the spade connector set in place. Pull the spade connector with some force and make sure the spade connector does not fall out or move too much.


7. Now place the fuse tap in position 7 and the wire with spade connector on the top end on position 47. *********Make sure you dont plug it in the lower end as that is always +12V ********* Doing so might damage the switching circuit when you start the car*******



8. Now start your car or put the key in ACC position and verify the Radio and the Charger turn ON. Turn your car off and the charger should turn of as well.

9. Now carefully tuck the wire in a good position and lock the fuse board back in place. Verify again by starting your car that it works and nothing was unplugged when you put the fuse board back in place.

You should be all set

Prashant

Last edited by psuryava81; 10-26-2014 at 09:46 PM.
psuryava81 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 11:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use