![]() |
![]() |
|
|
||||||
|
General E46 Forum
This is the place to get answers, opinions and everything you need related to your E46 (sedan, coupe, convertible and wagon) BMW! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
Throttle body plate broke opinions needed
So the part of the throttle body that holds the throttle cable broke off just a little piece of the plastic.
I would hate to spend 300-400 bucks for a new throttle body. is there anything I can use to basically put something like jb weld maybe to hold it down. the red circle is the small part that broke off
__________________
|
|
|
|
|
|
#2 |
|
Registered User
|
ok well I ended up fixing it it a 99cent plastic welder and 99cent metal wire.
thank god I almost ordered a new throttle body.
__________________
|
|
|
|
|
|
#3 |
|
Registered User
|
Im glad you fixed it so fast.
__________________
|
|
|
|
|
|
#4 |
|
Banned User
|
how did you break it? can you post pix
|
|
|
|
|
|
#5 |
|
Registered User
|
I accelerated hard one time and it broke off. dunno why BMW uses plastic on this and their water pumps and other things. even cheap civics use metal for these parts.
thanks only 2 days and I missed my car like crazy lol
__________________
|
|
|
|
|
|
#6 |
|
/// Limitless
|
Props to you. Did you take a picture of the repair?
__________________
![]() /// MODS /// Auto => 6-Spd Manual Conversion | Apex EC-7 | Koni/Ground Control Coilovers | Vorshlag Camber Plates | Meyle HD LCA | PowerFlex bushings | GruppeM CAI | Shark Injector | 6000k HID's and Fogs | BMW European MTechII | BMW Performance Shifter | ACS Mirrors and Rear Spoiler /// |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|