|
|
|
|
||||||
|
Lighting Forum
Angel Eyes, DDEs, lighted rings, Clear Turn Signals, LEDs, Xenon, HID, or Bi-Xenon. If it lights up and you want to discuss it, post here! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
07-17-2011, 07:31 PM
|
#1 |
|
Registered User
|
Angel eyes 5A fuse help!!
So I just bought an e46 recently and am totally new to the car itself!! i noticed the car had angel eyes installed when i was buying it but it didnt work!! Now i want them to work and when i was looking at it I noticed that the 5a fuse connecting the yellow wire keeps blowing. now keep in mind that I am totally new at this in fact i dont know how it even should be installed so I dont mean to ask a dumb question but the truth is that i am puzzled with this!! Can anyone help me with this issue?!?! If someone can explain how its wired and how it works that would be greatly appreciated
|
|
|
|
07-17-2011, 09:21 PM
|
#2 |
|
Registered User
|
not sure which angel eyes you got on but I assume they all got similar wiring. Check this link out and see if yours is wired the same way and check. If fuse keeps blowing out then there might be a short somewhere.
http://www.fastm.com/m3/angeleyes_orionv2.html |
|
|
|
|
| Tags |
| 5a fuse, angle eyes, wiring |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
