any1 no how to remove hood?

DiasE46 · 07-17-2011, 11:54 PM

i want to take off my hood and i dont know where to cut the washer fluid cord

so0o0o some one help plz, i drive a 2004 325ci convertible

j_block · 07-17-2011, 11:59 PM

I don't think you need to cut anything...jus unplug the washer thing and take off...and pop off the vent thing

Sent from my SPH-D700 using Bimmer App

DiasE46 · 07-18-2011, 10:21 AM

unplug it where? from the washer fluid container?

Brinkley · 07-18-2011, 10:24 AM

You will need to unhook and remove the plugs from the hood washers along with the fluid hose and fish out of the hood, you remove the grommets on the tunnel and pull out. then unbolt top bolts and slide hood up and off. Definitely 2 person job.

CenCalBMW · 07-18-2011, 10:30 AM

It's an easy thing to do. I think there was DIY somewhere on the forums.

DiasE46 · 07-18-2011, 01:13 PM

thanks for all the help, wait could i take off the fluid hose with the washer container full?

07-17-2011, 11:54 PM	#1
DiasE46 Registered User Join Date: May 2011 Location: Connecticut Posts: 10 My Ride: E46 325 convertible View My Garage	any1 no how to remove hood? i want to take off my hood and i dont know where to cut the washer fluid cord so0o0o some one help plz, i drive a 2004 325ci convertible

07-17-2011, 11:59 PM	#2
j_block Registered User Join Date: Apr 2011 Location: SA TX Posts: 1,231 My Ride: 2003 325i View My Garage	I don't think you need to cut anything...jus unplug the washer thing and take off...and pop off the vent thing Sent from my SPH-D700 using Bimmer App __________________

07-18-2011, 10:30 AM	#5
CenCalBMW Registered User Join Date: Jul 2011 Location: CenCal Posts: 69 My Ride: 323 View My Garage	It's an easy thing to do. I think there was DIY somewhere on the forums. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

07-18-2011, 10:21 AM	#3
DiasE46 Registered User Join Date: May 2011 Location: Connecticut Posts: 10 My Ride: E46 325 convertible View My Garage	unplug it where? from the washer fluid container?

07-18-2011, 10:24 AM	#4
Brinkley Registered User Join Date: Dec 2006 Location: asheville NC Posts: 1,424 My Ride: 99 328i, 02 325ic View My Garage	You will need to unhook and remove the plugs from the hood washers along with the fluid hose and fish out of the hood, you remove the grommets on the tunnel and pull out. then unbolt top bolts and slide hood up and off. Definitely 2 person job.

07-18-2011, 01:13 PM	#6
DiasE46 Registered User Join Date: May 2011 Location: Connecticut Posts: 10 My Ride: E46 325 convertible View My Garage	thanks for all the help, wait could i take off the fluid hose with the washer container full?