E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Welcome to the E46Fanatics forums. E46Fanatics is the premiere website for BMW 3 series owners around the world with interactive forums, a geographical enthusiast directory, photo galleries, and technical information for BMW enthusiasts.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   E46Fanatics > Tuning & Tech > DIY: Do It Yourself

DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need!

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 07-20-2011, 05:35 PM   #1
Spyder_Venom
Registered User
 
Join Date: Jan 2006
Location: Belle Plaine, MN
Posts: 130
My Ride: 01 325 CI
Troubleshooting: Final stage resistor or blower motor

The blower motor isn't working. I have the rheostat style HVAC controls and have tested the blower motor on all 4 speeds, with and without the AC and with recirculate.

I know the FSR is a common issue, but I'm not one to throw parts at a car unless I know I have isolated the broken part. My logic, check to see if the blower motor has power, if it does we know a fuse isn't bad and (I would assume) the FSR is working. I don't have a load tester but am assuming speed is regulated through amperage. This isn't defined in the Bentley manual.

When the car is off, zero voltage (as expected) is at the blower motor. When the car is on and the fan is set to any speed I get 12v on each pole of the electric motor (confusing). Leave the car on with the fan turned off, I still get 12 volts (even more confusing).

Short of unhooking the motor and connecting a 12 volt source to see if it spins, how would I continue to verify that it is the blower motor and not the FSR? Or is there another way to isolate the FSR/blower motor that I haven't found yet on the forum?

Last edited by Spyder_Venom; 07-20-2011 at 05:36 PM.
Spyder_Venom is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.
Old 07-20-2011, 06:05 PM   #2
Spyder_Venom
Registered User
 
Join Date: Jan 2006
Location: Belle Plaine, MN
Posts: 130
My Ride: 01 325 CI
So for those of you that plan to test it - here is the deal.

You can't take the voltage on the poles of the motor. You must remove the plug from the pass through in the blower motor cage. The driver's side pin will be fed 12 volts (constant) and the passenger side will have a variable voltage. The voltage should be (based on my car):

Fan speed 1: 4v, fan speed 2: 2.5v, fan speed 3: 1, fan speed 4: 0v.

Time for a blower motor.
Spyder_Venom is offline   Reply With Quote
Old 07-20-2011, 06:08 PM   #3
Solidjake
Zero. Oil. Leaks.
 
Solidjake's Avatar
 
Join Date: May 2008
Location: NYC
Posts: 22,292
My Ride: 2002 330i
Do you have zero air flow or pulsing air flow?
Solidjake is offline   Reply With Quote
Old 07-20-2011, 08:56 PM   #4
Spyder_Venom
Registered User
 
Join Date: Jan 2006
Location: Belle Plaine, MN
Posts: 130
My Ride: 01 325 CI
I had zero air flow when the car was stopped. There is a secondary blower motor that you can feel at speed located mounted down by the steering column. I was working on the primary blower motor located behind the cabin filter. The air flow I had while in motion was not enough to keep the cabin cool today (90F +).
Spyder_Venom is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON





All times are GMT -5. The time now is 08:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
(c) 1999 - 2011 performanceIX Inc - privacy policy - terms of use