Turn signal load resistor install question

IAMNOTaBUDA · 09-21-2011, 11:42 AM

I just ordered LED turn signal bulbs for my 2003 325i and because of that I had to order the resistors also. They won't come in until tomorrow and I'm pretty sure it's easy to install, but I have a question before I receive and install them tomorrow. When I install the resistor do I jus let it hang anywhere? Or do I have to tape it on something to avoid certain things?

Bryan@Jlevi SW · 09-21-2011, 01:29 PM

The resistors are known to get extremely hot, so I would advise to mount them away from anything that can melt. Here is an installation guide you can follow to help with the install. Good luck!

09-21-2011, 11:42 AM	#1
IAMNOTaBUDA Registered User Join Date: Feb 2011 Location: American Canyon Posts: 17 My Ride: 2003 325i View My Garage	Turn signal load resistor install question I just ordered LED turn signal bulbs for my 2003 325i and because of that I had to order the resistors also. They won't come in until tomorrow and I'm pretty sure it's easy to install, but I have a question before I receive and install them tomorrow. When I install the resistor do I jus let it hang anywhere? Or do I have to tape it on something to avoid certain things? __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

09-21-2011, 01:29 PM	#2
Bryan@Jlevi SW 1.888.JLEVISW Join Date: Dec 2008 Location: 2942 Scott Blvd, Santa Clara, CA Posts: 978 My Ride: E46 330i ZSP View My Garage	The resistors are known to get extremely hot, so I would advise to mount them away from anything that can melt. Here is an installation guide you can follow to help with the install. Good luck!