09-28-2011, 11:18 AM
|
#1
|
|
Registered User
Join Date: Sep 2007
Location: Chicago, IL
Posts: 3
My Ride: 2002 325i
|
used Idle Stabilization Valve from M54
Hi There;
In the quest to try and solve the idling issue on my 2002 325i one of the components replaced at 80k miles was the idle stabilization valve. Prior to this I had cleaned the device as seen in the DIY videos, replaced both sections of the Intake boot, made a visual inspection of the DISA and vaccum lines, etc before finally replacing this component. Sure enough, the Idle Stabilization valve wasn't bad afterall. However! I still have the original unit taken from the car and cleaned three or four times carefully in storage and I'd like to try and sell it to make up for needed maitenence. Off of RealOEM.com here's the data;
Idle stabilization valve (ICV)
"T-Shape Idle Regulating Valve" Bosch Part number 13411744713
Unit comes complete, but without the bracket or rubber mounting. Keep in mind this is used, but it's a cheaper alternative to buying a new one if you need it for the short term. Asking price is 60.00 USD. Price too high? If you can find me a lower price please send me the link, I haven't really determined fair market value yet. Crazy to sell a used ICV? Send me a PM, but be kind, I'm not trying to scam, cheat, rob, or otherwise malaign buyers, and I'll probably take the ad down. Otherwise, just, er, send me a PM and we can talk. Photos available upon request.
|
|
|