FS/FT 2005 Subaru Sti WRB on Gold 45k 390 awhp

SOLD!!
2005 subaru STI
44,xxx miles
6speed
2nd owner(bought bone stock with 16k miles from a 55 year old man)
Clean title in hand
0 accidents
VIN #- Jf1GD70635L504943

Engine:
All of the engine mods have been well thought out and done to improve the weak points in the OEM hardware and to make for a solid, reliable, monster of a daily driver. I can write a paper on how much research i have done to eliminate flaws, safely make the power attained and ensure the most reliable 400hp daily driver one can wish for. This is a turn key driver, since the car has been tuned, i have popped the hood to change and check my oil and wipe down the powdercoated pieces in the engine compartment. This isn't one of those modded cars that needs to be on jack stands every weekend.
It put down 387awhp and 359tq @ 20psi conservative tune.
Ej257 2.5l boxer
-Perrin rotated turbo kit:
http://www.perrinperformance.com/pro...gory=5&model=2
-Garrett gt3076r .82 (rotated, along with a larger hotside reduces backpressure in the manifold and lowers EGTs which makes the motor less prone to knock and thus cracking ringlands. Full boost in 2nd gear is @ 4200)
-Precision 46mm v-band wastegate rerouted into the downpipe
-Tial Q-r recirculating BOV
-Custom inlet (with BOV recirc, 1/8'' npt bung and a -8 a/n fitting for the pcv) and intercooler piping (All powder coated gloss black)
-TXS fmic
-TGV fully ported and delete then media blasted and internally polished
-KS-Tech phenolic TGV spacers
-Perrin fuel rails
-DW 850cc injectors
-Greddy evo2 catback with kartboy hangers
-Walbro255 intank fuel pump
-NGK LFR7AIX one step colder iridium spark plugs- Installed about 200 miles ago. At this point i decided to do a compression test just because i was in there. 145 across the board(with photo documentation to prove it)

Suspension & Wheels:
-RCE yellow v2 springs
-Whiteline race alk

OEM Gold BBS
-225/45/17 dunlop grasphics 2 snow tires 90% tread left

Interior:
-Pioneer avic f90bt navigation unit w/ bluetooth and ipod
-Autometer ES(perfect match)boost
-Autometer red LED digital oil pressure
-AEM wideband
-WRXtra pod(oem)

Exterior:
Limited front lip plasti-dipped
Wingless OEM trunk
Pillarless grill
OEM 2007 STi rear diffusor

Maintenance
Motul Gear300 in the transmission every 10k
Motul 90pa in the rear diff every 10k
Amsoil 5w40 every 2500-3000 miles
New OEM brakes @ 32k
New Bosch Icon wipers this week
New snow tires

The Bad (its a car, of coarse its not perfect)
-Previous owner kissed a few parking blocks, so the front bumper has some scrapes on the spliters and the center ( the lip covers some of it, doesn't look bad)
-Small ding on drivers side fender and roof. Both are very small with no paint imperfection. Paintless dent removal quoted me 150 for both.
-Few small scratches, nothing major.
-Drivers side floor mat has seen better days, but still looks good.

The Good
Besides everything listed already...
-Its fast, awesome, amazing in the snow and reliable as your grandmother's Hundai. This car has never left me stranded or disappointed, starts up and idles like stock.

Price & Trades
$22,500
I am open to trades. I am not looking to add cash. I would consider e46 m3, preferably older with cash on top. 135i &335i, audi s4 (b5 and b6 + cash), z06, a perfect evo, m5, maybe a jeep wrangler. Nothing fwd.

I check my PMs here often, feel free to email me at v_anatra@yahoo.com or call or text me at 516-859-6999

I have more pictures and a cold start video at:
http://s29.photobucket.com/albums/c2...STI%20forsale/

Pics were taken 10/20/2011

Amazing car, perrin everywhere you look, whoever buys this car will have a real good time with it, glws

Sent from my DROIDX using Bimmer

Thanks man.

Sunday bump

Supercharged E36 M3 + a little loot??

Not really what i am looking for and it would have to be a little more than a little bit of loot. PM me an offer and pics.

Morning bump

bump for a clean car, love how its a DD!

Why is this rusty?

wow nice car... wish you were closer... I am actually considering selling my 2002 M3 ...it's steel grey with red interior... (awesome color)

pm sent earlier today.

Originally Posted by _.dstrukt.n1ne

Why is this rusty?

The turbine housing is cast, not stainless steel (the only turbine housings which are stainless steel are the tial v-band housings). So like any factory or aftermarket turbo (non coated) turbine housings, exhaust manifolds alike, they get surface rust. Not anything to be concerned of.

I've always loved STi's. Well written post, GLWS!!!

trade bump? http://s806.photobucket.com/albums/y...rton/05%20Evo/

No thanks

bump