||Thread Tools||Search this Thread||Rate Thread||Display Modes|
|10-28-2011, 06:29 PM||#1|
(OH) 2003 Completely Built bby evo 8 57k miles
UPDATE: input shaft bearing went out today. I have spare part to fix it but would like to leave that decision up to the future buyer. If the buyer decides to do it himself I will sell the car for $19,000. If the buyer decides he would like for me to do it then i will sell the car for $20,000. I need this car gone.
Chillicothe, ohio 45601
740-703-2049 call or text anytime day or night.
Whats up all. This is my 3rd evo and probably my last for awhile. I recently purchased this car with the intention on keeping it forever and ever. Some serious stuff came up this past week and I have to get something more practical. This car runs very well with absolutely no problems. It was built within the past 1,800 miles and comes with quite a few stock parts as well (stock rods and pistons, turbo, wing, lifters, headstuds, taillights etc) I love this car with a passion but family is way more important to me than a car. Essentially I need to sell or trade for a more practical car. I will trade for an 01+ m3 smg or 6-speed doesnt really matter but no verts. If i trade it needs to be of equal value or cash on top on your end. Colors I am looking for are black or white. If you have something else I will entertain offers but please no red interior.
CAR INFO:2003 bby with 57,000 on car and 1,800 on build. car is on stock ecu and was tuned 2 weeks ago by ipsmotorsports in columbus, ohio. The car made 545hp at8,000rpms at 28psi on a very very conservative tune with absolutely no counts of knock. Please feel free to call them with any questions or concerns about the car at 740-657-3278 ask for mike. ipsmotorsports.net is there website
Performance motorsports built this car and will be happy to answer all the questions about the car. His name is alex. 631-366-2152 there website is theexperience.com
I am in somewhat of a rush to sell it but not at the point of loosing my tail. This car starts up and drives every time. All parts are new and are solid parts.
The Bad: On the trunk lid the clearcoat is coming off. If the buyer puts a deposit down I will use that money to get it fixed. I spoke with a buddy that works for mitsu and he will do it on the side in one night for the buyer. There is a cigarette burn in the seat from the past owner. Other than that the car is absolutely solid. I am sure going to miss her.
Car price is $23,000 O.B.O (no lowballs but will entertain reasonable offers)
MAP performance rods
Wiseco .20over 9:1 comp pistons
upgraded wrist pins
Power Enterprise headgasket
Full Ported race head (headgames)
kelford 272 cams
dual valve springs
hks dli ignition
big bore hydraulic lifters
built transfer case with quaiffe lsd
greddy turbo back exhaust
ETS 4 inch anodized black intercooler
ETS intercooler piping
Ams f1i intake manifold
Boomba 75mm throttle body
ETS equal length manifold
FP 3586 turbo
hallman maual boost controller
4 inch intake
Boomba fuel rail
Fuel pressure regulator with gauge
full blown double pumper
valve cover tapped with -10an lines to oil catch can to a vacuum pump
front cross drilled rotors
rexpeed rear spoiler
AEM digital gauges (air/fuel, oil temp, oil pressure, water temp and boost
Pics can be found here. Sorry they were pics from a phone just to give a more general idea. If someone is interested I will gladly take more pics. Stock parts pics are in there as well that will come with the car
there is alot more that i forgot about, any questions about it you can just ask, motor was built at performance motorsports of smithtown, build has 1,800 miles. Car had leakdown test at ips motorsports 2 weeks ago before tuned and checked out perfect. Pics are in this link but brand new ones will be up tomorrow
Last edited by boostalmighty; 11-04-2011 at 03:50 PM.
|Ads by Google|
Guests, get your FREE E46Fanatics.com membership to remove this ad.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|