![]() |
![]() |
|
|
||||||
|
Driveline, Engine & DME Tuning
Talk about driveline improvements, NA tuning and DME tuning your E46 BMW here. This includes diffs, intakes, exhausts, chips, software and OBD tuning. |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
this is just the belt, right?
This is just the belt, right? I noticed this noise happening at idle after a 20 mile trip in 37 degrees F. The only non-stock part of the belt/pulley setup is the ATI superdamper. The belt probably has like 35K on it.
Thanks guys!
__________________
![]() Technique Tuning Stage 1 Turbo w/ Greddy Profec B Spec II | 3.07 Quaife ATI Super Damper | Vaio Oil Pump | VAC Pan Baffle | SRE Organic Clutch Turner Reinforcements | SPC Camber Arms | Powerflex FCABs & SFBs Turbo Driveability Video Horsepower vs. Torque - updated |
|
|
|
|
|
#2 |
|
Registered User
|
Sounds like the belt to me - to test I would put some water on the belt to see if it disappears.
|
|
|
|
|
|
#3 |
|
Registered User
Join Date: Jan 2008
Location: Ridgeland, MS
Posts: 5,345
My Ride: ZHP Custom Stage 3.5
|
I just replace the top idler pulley (the Main one showing in the Video). Made similar noise...
__________________
..::|TrippinBimmer's Boost Build with Cool Parts|::.. 4**whp/3**tq SAE Corrected |
|
|
|
|
|
#4 |
|
Banned User
|
ditto on the idler, mine is bad too. cold weather kills the bastids!
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|