Enco B046 - Dynavin Clone

Got my Sat Nav working

iGo seems a bit convoluted to search for a UK Postcode though, does anyone have a user manual for planning a route, or can detail steps needed to create a route based on a postcode (or zip code for you USA guys ) ?

Secondly is there any way of listing music in iPod mode in Album format not just a long list of all the individual tracks ?

oh and did anyone else have issues getting a USB cable into either of the rear USB Connectors ?

I got them in but they were preventing me pushing the unit fully into housing so left them loose until I could figure out how to get around it !

Hey fish, where you got the USB things for picture 3.

Ok so I installed the iGo 2.0 and I hit the turn off bottom thinking it wold exit the igo but now this shows up when I press the navi button:/ any ideas? I tried puling the maps sd card but no difference



Sent from my PG86100 using Bimmer App

Originally Posted by Breyton-BMW

I have researched about this as igo maps are not available for the Philippines so I have no other choice but to look for an alternative. The Dynavin seems to be ok with other like Papago and Garmin Xt etc. As long as they cn run on winCE, they should run on the enco too. This also goes for all chinese made gps. Try searching on GPSunderground.

Pare pm me your email. I have the Philippines map running on my Dynavin. It's compatible with igi8 and Primo. I'll send you the files

have igo primo installed on mine worsk sweet and full uk postcodes.

plus if sonme of you guys didnt know the WinCe version can be "jailbroken" and wifi dongle installed(3G aswe ll soon)

Originally Posted by teeach

have igo primo installed on mine worsk sweet and full uk postcodes.

plus if sonme of you guys didnt know the WinCe version can be "jailbroken" and wifi dongle installed(3G aswe ll soon)

how do you do that? and with no android side what could we do with wince verion with 3g?

internet and email mostly buut there are apps out there for wince, just not very good lol

Hi all I installed the b146 at the weekend & I have 2 problems I hope someone can help me with 1st I fitted the rear camera & when I put it in reverse it works but as soon as I go out of reverse the the screen just goes black with a no signal message in the middle & the whole unit is blocked it won't even turn of the only way to get it going is to turn ignition of then back on & then the unit works fine until I use reverse gear. 2nd problem is I can't get the satnav software to work I purchased the card with unit basically I press the nav button & the message can't find navigation software appears . I would appreciate any help

Question... what are you guys going with? The winCE or Android one?
I personally don't care about wifi. Just want the navigation to work and to connect my iPhone.

The android one is looking like the better option since it's got 512mb DDR2 but that's just my thoughts from being a computer engineering major.
Do you need some sort of 3G service for the maps to work on the android version?

ok looks like reading from iPod it doesn't allow for Album browsing, so basically presented with a full long list of track names, however putting albums into folders and putting on SD card slot left hand side allows browsing via albums

Next question installed Torque app via sd card, but when I run it (trying to connect to my ELM Bluetooth ODB Scanner) it can't see it because BT not enabled, How do you enable BT within Android on the B046 ?

Originally Posted by Wickedly

Hey fish, where you got the USB things for picture 3.

Hey Wickedly,
I purchased them thru Dynavin solutions, they were I think $19.00 each. And they are perfrct for flush mounting. Nice and clean.

Originally Posted by m7alj

Hi all I installed the b146 at the weekend & I have 2 problems I hope someone can help me with 1st I fitted the rear camera & when I put it in reverse it works but as soon as I go out of reverse the the screen just goes black with a no signal message in the middle & the whole unit is blocked it won't even turn of the only way to get it going is to turn ignition of then back on & then the unit works fine until I use reverse gear. 2nd problem is I can't get the satnav software to work I purchased the card with unit basically I press the nav button & the message can't find navigation software appears . I would appreciate any help

not sure about your first question.for your second,go to setup on nav screen,touch nav setting,click folder choose sd card,then find the igo.exe then touch home button and now it is setup for nav.

Originally Posted by m7alj

Hi all I installed the b146 at the weekend & I have 2 problems I hope someone can help me with 1st I fitted the rear camera & when I put it in reverse it works but as soon as I go out of reverse the the screen just goes black with a no signal message in the middle & the whole unit is blocked it won't even turn of the only way to get it going is to turn ignition of then back on & then the unit works fine until I use reverse gear. 2nd problem is I can't get the satnav software to work I purchased the card with unit basically I press the nav button & the message can't find navigation software appears . I would appreciate any help

Did you splice the two pink wires together? Apart from that detail I can't see why it will not switch back to the main screen (or whatever you were doing before).

Originally Posted by kawracerx

not sure about your first question.for your second,go to setup on nav screen,touch nav setting,click folder choose sd card,then find the igo.exe then touch home button and now it is setup for nav.

Just tried that & still won't work & now when I press nav settings it goes to screen saying no signal so it won't let me go to settings

Originally Posted by sackz23

Did you splice the two pink wires together? Apart from that detail I can't see why it will not switch back to the main screen (or whatever you were doing before).

Yep joined the two pink wires together

Check your cables for loose wires and connections. Reset the unit once you've checked everything.

Originally Posted by FISH330XI

Hey Wickedly,
I purchased them thru Dynavin solutions, they were I think $19.00 each. And they are perfrct for flush mounting. Nice and clean.

Thanks, I will check it out

Originally Posted by FISH330XI

Hey Guys, I Don't have an Enco, but I did install my Dynavin earlier this week. Just wanted to share some Ideas and Install options that I used. I guess these units are pretty much the same. Of course if they are not then some of these Ideas may not work. Either way. The Dynavin has two USB's and a Headphone (for AUX purposes) these come out of the back and can be extended. Below is a picture of two usb and one headphone Aux jack that I extended to the back portion of my Euro tray. I also extended the Ipod input to the inside of my euro tray. There is also the picture of the backup camera that I in stalled in the trunk Keyhole. Like I said I don't know if the Encos have all these inputs but if they do. here are some options. One of the USB's is connected to the CD/DVD/AUX board so you can play music files from a USB. the other USB is connected to the nav board. I guess for updates and such. either way I extended them both so I had access to them without having to remove the radio again. if you have any questions, let me know.

You should have create a DIY on how to setup those USB and aux. your setup is so clean!! Props to you and sharing those pics!!

I want the Android one as that offers more possibilities now and down the road. You get all the same benefits of WinCE (offline navigation - sold separately, ipod, bluetooth etc.) albeit with some additional setup headaches.

But you can hack the OS (M3evolutions ROM), get more/better apps than what WinCE offers, tether wifi (dynavin only for now, infrastructure only), add apps like torque pro . . . like Jeff says, if you like to tinker get the Android. If not, WinCE.

Originally Posted by Press22

Question... what are you guys going with? The winCE or Android one?

Originally Posted by Press22

I personally don't care about wifi. Just want the navigation to work and to connect my iPhone.