Is this a programmable LCM?

I have an 01 M3 vert but my LCM couldn't be coded/programmed for oem led tails. Ive done the resistor mod to get rid of the warning on the dash but I'd like to do this the "right way". A local gave me this lcm but Im not sure if its the correct one or not.

My car currently has OEM Xenons and rain sensor wipers.

This is what I'd like to do with the spare.
1)Program it with my vin and mileage
2)Code it for oem xenons and rain sensor for a 2001
3)Code oem led tail lights
4)Front corner delete mod

Would it be possible to code this LCM?

Here are pics of the spare lcm that I have. I think its from a 2004, but the faceplate might have been changed. I dont care for the auto function as I never use it anyway.

George, it is definitely programmable.

Switch unit, light / foglamps 1 09/2005 61316936836 ENDED

This was used on cars produced from 07/2003-09/2005 according to real oem so it is programmable. You will get a tamper dot though unless you end up using PA soft to change the vin.


You were also correct about the faceplate being changed, as the part number states it is for cars with a rain sensor, fogs and auto lights.

Terraphantom can code it properly for you most likely.

Originally Posted by 04yfz

George, it is definitely programmable.

Switch unit, light / foglamps 1 09/2005 61316936836 ENDED

This was used on cars produced from 07/2003-09/2005 according to real oem so it is programmable. You will get a tamper dot though unless you end up using PA soft to change the vin.


You were also correct about the faceplate being changed, as the part number states it is for cars with a rain sensor, fogs and auto lights.

I wonder if xenons will work on this even when coded? Ill ask terra and find out! Thanks!

Originally Posted by Solidjake

Terraphantom can code it properly for you most likely.

Thank you gentlemen

Ill go ahead and get in touch with him

Originally Posted by DropTopKingM3

I wonder if xenons will work on this even when coded? Ill ask terra and find out! Thanks!



Thank you gentlemen

Ill go ahead and get in touch with him

Yes, although according to the part number it states this was for a car with Xenons, but that's only a programming change anyway.

Originally Posted by 04yfz

Yes, although according to the part number it states this was for a car with Xenons, but that's only a programming change anyway.

Perfect. Thanks so much for your help! Ill let you know what the outcome is.

Originally Posted by 04yfz

Yes, although according to the part number it states this was for a car with Xenons, but that's only a programming change anyway.

Not completely true... Non-xenon LCMs dont have the hardware to control the auto leveling motors