![]() |
![]() |
|
|
||||||
|
Lighting & Mobile Electronics (I.C.E.)
Xenon lighting, HID kits, fog lights, BMW head units, navigation, speakers, subwoofers, In Car Electronics (I.C.E.), carputers, DDEs, angle eyes, halos, LED tail lights, interior lighting, etc. |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
E46 coupe OEM amber LED tails + harnesses + inner panels FS
I got rid of my E46 coupe a while back so I have no use for this stuff anymore. I have a set of amber OEM LED outer tails for an E46 coupe. I don't have the inner/trunk lid lights to go with them. The tails are in unbelievable shape. One is still in plastic wrap from shipment to me by the previous buyer, the other is out of the wrap but I'd say nearly flawless.
I'm also including the harnesses to install these in a non-LED coupe (note: your car will probably still throw bulb out lights until you get it programmed to accept these tails). I did the outer ring mod on one of the harnesses but never got around to doing the other. However, I believe I still have the pin necessary to do the mod and you could easily do it. I'm also including the inner panels that cover the tail light openings and have the interior lights for the trunk. The normal non-LED panels will not work. I'm asking $250 shipped for all of that. I think that's a fair price considering the cost of the harnesses ($40-50) and the inner panels, which are about the same. I'll take Paypal and will ship only in the continental US. I also have a complete set of OEM xenon (not bixenon) headlight parts - I basically have a xenon headlight from a sedan and another from a coupe, and had planned to simply transfer the parts to my halogen bodies. If there is any interest, I will post those with a price. I think I may also still have some OEM clear/red tails. Will check this weekend. Left tail (harness is attached to this one - the other harness is not pictured): ![]() Right tail: ![]() Inner panels: Last edited by Shade00; 02-18-2012 at 09:41 AM. Reason: Added pics. |
|
|
|
|
|
#2 |
|
Registered User
|
Pics?
|
|
|
|
|
|
#3 |
|
Registered User
|
Will have them up later this afternoon. Sorry for the delay - I couldn't find my cable last night, so I am going to purchase one after work.
|
|
|
|
|
|
#4 |
|
Registered User
|
Added pics in the OP.
|
|
|
|
|
|
#5 |
|
Registered User
|
Damn, if I was still living in Shreveport, I'd drop by and give you cash!
|
|
|
|
|
|
#6 |
|
Registered User
|
by any chance u got the screw in type amber corners and sidemarkers lying around? lemme know, i'm dying to find them!
|
|
|
|
|
|
#7 |
|
Registered User
|
|
|
|
|
|
|
#8 |
|
Registered User
|
|
|
|
|
|
|
#9 |
|
Registered User
|
|
|
|
|
|
|
#10 |
|
Registered User
|
are u parting the tail lights??? if so... driver side outer how much?
|
|
|
|
|
|
#11 |
|
Registered User
|
Sorry, not parting the tail lights right now! Will consider offers on the set.
|
|
|
|
|
|
#12 |
|
Registered User
|
interested.. any idea how much it will cost them to get reprogrammed? Also I know you have a 325ci but will these fit a 323ci? I hear that there are minor differences that might affect the fitment.
Last edited by dsandif; 03-03-2012 at 05:16 PM. |
|
|
|
|
|
#13 |
|
Registered User
|
Sorry for not seeing your reply until now. I'm pretty certain that coupe tail lights are universal for the E46s. As far as reprogramming, I would suggest calling your local BMW dealer or an independent BMW dealership to ask about their rate. Indy shops will usually do it much cheaper.
|
|
|
|
|
|
#14 |
|
Registered User
|
i'm planning on going to the dealer Monday afternoon to ask about it. Whats the inner ring mod that you mentioned in the OP? would I need to do that to the other harness to get them to work?
|
|
|
|
|
|
#15 |
|
Registered User
|
The LED tails were installed in OEM applications with a brake pedal that would only light the inner rings up when depressed partially; when pressed all the way in it would light the outer ring up as well. Other coupes don't have that functionality, so the mod lights up the outer ring anytime the brake pedal is depressed. If I have the necessary bits I'll mod the last harness myself.
Someone make me an offer on these. They need to go ASAP. Can't move this stuff to yet another house. |
|
|
|
|
|
#16 |
|
Registered User
|
Payment sent for the tails.
__________________
6MT CB ///M3.:. USMC Vet .:. Univ. Student ![]() ///Alpine .:. 9861 .:. H/C 701 .:. S624 .:. JL Audio .:. 300/4 300/2 500/1 .:. 10W6v2 wicked .:. Focal K2Ps Diamond Graphite v710s .:. KW2s .:. ZCP Rotors .:. 996 Calipers .:. SS lines .:. Textar pads .:. VIS Bootlid CSL Diffuser .:. CF Grills & Gills .:. Alcantara Steering Wheel & Boots .:. 55w 5000K TFX My Sequential Turn Signals |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|