FS: 325/330 eBay headers ceramic coated

I bought these from another forum member a couple years ago and had them on my car for ~20K miles. They were ceramic coated when the original owner had them. There are some small scrapes in the coating from removal and installation. The headers have both been welded at the collector while installed on my car to facilitate fitment. These are not the prettiest set of headers you'll see, but they do work. The performance gain is very noticeable as you are probably aware of from other threads on the forum. I had these bolted to a Highline Tuning full exhaust so they SHOULD mate right up to your stock flanges. I can assure you the length is correct, but the flanges are basically a crapshoot as they may be a couple of degrees off from how yours sit. This is a very common issue so I will advise planning a trip to your local exhaust shop for the final tweaking of the flanges. Again, this is just a disclaimer in the event that they are not 100% perfect fitment to your stock exhaust. Rear O2 sensors are still installed but I just used them as "plugs" since I ran a simulator. The wires on these have been cut all the way down to nothing so they are good for nothing but being a plug. The front sensors are NOT included.

Looking to get $40 plus actual shipping costs. I will only ship in the US.

PICS:

How much horsepower did you gain and do they pass emissions ? do they fit my 04 325Ci ?

Hmmmmm

Also interested if these pass emissions....

Someone has sent me a PM saying they want these. I will update this thread either way.

You WILL NOT pass emissions with these without adding an aftermarket catalytic converter.

pm sent

For all those who sent a PM, there are two people waiting for shipping quotes at this time and I will have these sent to them tomorrow evening. If they are not sold I will go in order of timestamps on the PMs for those interested who I have not yet responded to.

You wont pass emissions and you will have the "service engine soon" light on. My advise would be to get it inspected and then put the headers on. Start dealing with it in 10 months. haha

Originally Posted by mq124

You wont pass emissions and you will have the "service engine soon" light on. My advise would be to get it inspected and then put the headers on. Start dealing with it in 10 months. haha

The SES light can be cured by using an O2 simulator. You will not pass sniff test emissions though...

^true. Just wanted to make sure they knew that it would trip without other options being used. O2 simulators, nonfoulers if they fit, or the EU2 tune are all possibilities

great price for these btw! I just paid 110 shipped for used ebay headers and was perfectly content with that price for knowing that they would fit instead of risking receiving the wrong ones

check your PM....

Ok, I replied to all PMs. Shipping will be APPROXIMATELY $25 to the east coast and $40 to the west coast. This should give anyone who has not been responded to a good idea of what it will cost to ship these. There are four people in line right now so I anticipate these being sold in the next day. Stay tuned as I will keep this thread updated.

Edit: NVM. Read the description wrong.

Sold!!!